bing tracking image
Q & A Icon

Need To Replace Shackles And Bushings On A 1995 Ranger Boat Trailer  

Updated 02/03/2026 | Published 06/23/2024

Question:

I wont to replace the shackles and bushing on a1995 ranger boat trailer

0

Expert Reply:

Hello Jerry, I can definitely point you in the right direction.

For your shackles, it is important that the new shackles are identical in size to the old shackles. I do not have a way to look up your trailer to know the current shackle size, so your best bet will be to take a measurement of the shackles. They measured from center hole to center hole. For example, the most common shackle size is 2-1/4" long such as part # TRSL225. If you can provide me with your shackle length, I am happy to make a recommendation.

The bushings are typically more standard. An example is part # TRBU11566 which is a 1-3/4" long bushing with a 11/16" OD and 9/16" ID. Please do check your bushings and verify this is what you need. Feel free to reach out to me if I can do anything else.

expert reply by:
0
Jesse M
Jesse M. profile picture
Etrailer Expert

Jesse M.

2/3/2026

Hey Jerry, were you able to measure the shackles on your Ranger boat trailer to find the right replacement size? Once you had those numbers, did the 2-1/4" shackles and 1-3/4" bushings line up with what you needed? Your update could make it easier for others working on similar trailers.

Product Page this Question was Asked From


Q & A Icon

Continue Researching

See More Q&A Expert Answers >>