Replacement 4 Lug Hubs For a Boat Trailer Using BT10 Wheel Hubs
Updated 02/17/2026 | Published 06/20/2024
Products Featured in This Question
Question:
Need two BT10 WHEEL HUBS AND BEARINGS. 4 Lug. Goes on a boat trailer. Thank you
asked by: Donald M
Expert Reply:
I am not aware of a BT10 wheel hub. If it is reference to a spindle we have a BT8 or BTR spindle size. The BT8 has a 1" diameter for the bearings while the BTR is a 1-1/16" diameter for the bearings. If you have something different please let me know what size bearings and grease seal you have so I can verify if we have anything for your application.
If you have the BT8 it will use one of the following 4 lug hubs.
Standard Hub # AKIHUB-440-2-G-1K
EZ Lube Hub # AKIHUB-440-2-G-EZ-1K
If you have the BTR it will use one of the following 4 lug hubs.
Standard Hub # AKIHUB-440-2-G-2K
EZ Lube Hub # AKIHUB-440-2-G-EZ-2K
Product Page this Question was Asked From
Trailer Idler Hub Assembly for 2,000-lb Axles - 4 on 4 - Galvanized
- Trailer Hubs and Drums
- Idler Hub
- Standard
- L44643 / L44643
- Marine Grade
- For 2000 lbs Axles
- 1/2 Inch Stud
- 4 on 4 Inch
- 8 Inch Wheel
- 10 Inch Wheel
- 12 Inch Wheel
- 13 Inch Wheel
- 14 Inch Wheel
- etrailer
more information >
Continue Researching
- Video: All About the Easy Grease Trailer Idler Hub Assembly for 2K Axles
- Shop: Easy Grease Trailer Idler Hub Assembly for 2K Axles - 4 on 4 - L44649 Bearings - Pre-Greased
- Shop: Trailer Idler Hub Assembly for 2,000-lb Axles - 4 on 4 - L44643 Bearings - Pre-Greased
- Shop: Trailer Idler Hub Assembly for 2,000-lb Axles - 4 on 4 - Galvanized
- Shop: Easy Grease Trailer Idler Hub Assembly for 2K Axles - 4 on 4 - Galvanized
- Q&A: Replacement Hub for 1" Straight Spindle on Boat Trailer
- Q&A: Replacement Hub for 4-1/8 Inch Long Idler Hub
- Q&A: Could Trailer Hub # AKIHUB-440-2-G-EZ-1K Fit Spindle that Measures 1 inch In Diameter
- Q&A: Replacement Hub Assembly for Older Boat Trailer with 4 Bolt Pattern
- Q&A: What Spindle Should be Used with Trailer Hub # AKIHUB-440-2-G-EZ-1K
- Q&A: Recommended 2,000 lbs Idler Hub and Replacement Spindle w/ a 4 on 4 Hub
- Q&A: Correct Replacement Idler Hub for Trailer with L44643 Bearings and 4 Bolt Pattern
- Shop: Bearing Kit for 1" BT8 Spindle, L44643 Inner/Outer Bearings, 34823 Seal
- Shop: Curt Powered Tail Light Converter with 4-Pole Flat Trailer Connector
- Article: Trailer Wiring Diagrams
- Search Results: trailer hitch
- Shop: Trailer Hitch
- Search Results: trailer tires and wheels
- Video: Measuring To Choose The Right Trailer Axle
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Shop: Universal Installation Kit for Trailer Brake Controller - 7-Way RV and 4-Way Flat - 10 Gauge Wires
- Shop: Trailer Wiring
- Search Results: trailer wiring
- Shop: Suspension Enhancement
- Article: How to Measure for Trailer Hitch Drop
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Video: etrailer VS Dexter Self Adjusting Brakes Comparison
- Shop: Brake Controller
- Search Results: trailer jack
- Search Results: trailer lights
Jameson C.
2/17/2026
Hey, did you get a chance to check which spindle size your boat trailer uses—BT8 or BTR? Once you know the bearing and seal sizes, it’ll be easier to confirm which 4-lug hub fits best. Let me know what you find so we can narrow it down.