Correct Replacement Idler Hub for Trailer with L44643 Bearings and 4 Bolt Pattern
Updated 06/16/2021 | Published 06/14/2021
Question:
the aluminum hub for my boat trailer broke pressing in the race for the bearing need a replacement 4 bolt 4inch spacing bearings is L44643 1 inch shaft current hub is 3 and 7/8 inches long overall rear seal is 12165 thank you for your assistance.
asked by: Kenneth D
0
Expert Reply:
The correct idler hub assembly you're looking for is the Trailer Idler Hub Assembly part # AKIHUB-440-2-G-EZ-1K. This is a complete unit with bearings, races, and seals. They are made of steel with a galvanized finish. I am not aware of any such aluminum idler hub.
expert reply by:
Conner L
0
Product Page this Question was Asked From
Easy Grease Trailer Idler Hub Assembly for 2K Axles - 4 on 4 - Galvanized
- Trailer Hubs and Drums
- Idler Hub
- EZ Lube
- L44643 / L44643
- Marine Grade
- For 2000 lbs Axles
- 1/2 Inch Stud
- 4 on 4 Inch
- 8 Inch Wheel
- 10 Inch Wheel
- 12 Inch Wheel
- 13 Inch Wheel
- 14 Inch Wheel
- etrailer
more information >
Continue Researching
- Video: All About the Easy Grease Trailer Idler Hub Assembly for 2K Axles
- Q&A: Replacement Hub for 1" Straight Spindle on Boat Trailer
- Shop: Trailer Idler Hub Assembly for 2,000-lb Axles - 4 on 4 - Galvanized
- Shop: Easy Grease Trailer Idler Hub Assembly for 2K Axles - 4 on 4 - Galvanized
- Shop: Easy Grease Trailer Idler Hub Assembly for 2K Axles - 4 on 4 - L44649 Bearings - Pre-Greased
- Shop: Trailer Idler Hub Assembly for 2,000-lb Axles - 4 on 4 - L44643 Bearings - Pre-Greased
- Q&A: Replacement 4 Lug Hubs For a Boat Trailer Using BT10 Wheel Hubs
- Q&A: Recommended Replacement Spindle Or Axle For Older Spindle That Uses Short Hubs W/ L44643 Bearings
- Q&A: Replacement Hub Assembly for Older Boat Trailer with 4 Bolt Pattern
- Q&A: Replacement Hub for 4-1/8 Inch Long Idler Hub
- Q&A: What Spindle Should be Used with Trailer Hub # AKIHUB-440-2-G-EZ-1K
- Q&A: Could Trailer Hub # AKIHUB-440-2-G-EZ-1K Fit Spindle that Measures 1 inch In Diameter
- Shop: Bearing Kit for 1" BT8 Spindle, L44643 Inner/Outer Bearings, 34823 Seal