What Spindle Should be Used with Trailer Hub # AKIHUB-440-2-G-EZ-1K
Published 02/04/2020
Products Featured in This Question
Question:
building a small custom axle, what spindles would be an appropriate fit for this hub? This assembly will use an 4 on 4 ,8inch wheel assembly. Total weight of trailer with load is under 1000lbs. Thank You
asked by: Krome
0
Expert Reply:
The trailer hub part # AKIHUB-440-2-G-EZ-1K that you referenced is designed to fit BT8 spindles like the part # TRU94FR. This spindle is designed for 2,000 lb axles so it would easily work on a 1,000 lb total trailer.
expert reply by:
Jameson C
0
Product Page this Question was Asked From
Easy Grease Trailer Idler Hub Assembly for 2K Axles - 4 on 4 - Galvanized
- Trailer Hubs and Drums
- Idler Hub
- EZ Lube
- L44643 / L44643
- Marine Grade
- For 2000 lbs Axles
- 1/2 Inch Stud
- 4 on 4 Inch
- 8 Inch Wheel
- 10 Inch Wheel
- 12 Inch Wheel
- 13 Inch Wheel
- 14 Inch Wheel
- etrailer
more information >
Continue Researching
- Video: All About the Easy Grease Trailer Idler Hub Assembly for 2K Axles
- Shop: Easy Grease Trailer Idler Hub Assembly for 2K Axles - 4 on 4 - Galvanized
- Q&A: Replacement Hub for 1" Straight Spindle on Boat Trailer
- Shop: Trailer Idler Hub Assembly for 2,000-lb Axles - 4 on 4 - Galvanized
- Shop: Easy Grease Trailer Idler Hub Assembly for 2K Axles - 4 on 4 - L44649 Bearings - Pre-Greased
- Shop: Trailer Idler Hub Assembly for 2,000-lb Axles - 4 on 4 - L44643 Bearings - Pre-Greased
- Q&A: Recommended 2,000 lbs Idler Hub and Replacement Spindle w/ a 4 on 4 Hub
- Q&A: Replacement 4 Lug Hubs For a Boat Trailer Using BT10 Wheel Hubs
- Q&A: Replacement Hub for 4-1/8 Inch Long Idler Hub
- Q&A: Could Trailer Hub # AKIHUB-440-2-G-EZ-1K Fit Spindle that Measures 1 inch In Diameter
- Q&A: Replacement Hub Assembly for Older Boat Trailer with 4 Bolt Pattern
- Q&A: Recommended Replacement Spindle Or Axle For Older Spindle That Uses Short Hubs W/ L44643 Bearings
- Shop: Lock N Roll Articulating Trailer Coupler - Flat Plate Mount - Trailer Side - 11,000 lbs
- Shop: BT8 Spindle for 2,000-lb Trailer Axles - 1-1/4" Diameter
- Shop: Bearing Kit for 1" BT8 Spindle, L44643 Inner/Outer Bearings, 34823 Seal
- Search Results: weld on spindle
- Search Results: trailer hubs and drums
- Search Results: 8~259~5uc1~ez
- Search Results: spindle