Do Rhino-Rack Crossbars Fit RetraxPRO XR Tonneau Cover & Come With Mounting Hardware

Question

Question:

JUst had a ReTraxPro XR Tonneau Cover installed on My 2023 Ford F-150 Looking for cross bars. Will the RRVA180B-RRRLT600 Cross bars fit my truck and do the bars com with the Tslot mounting hardware? Thanks, Joe

asked by: Joe S

0

Expert Reply:

Hi Joe,

Thanks for the question, and the answer to both is yes. The Rhino-Rack Vortex Crossbars for Retrax XR and Mountain Top EVO-M Tonneau Covers # RRVA165B-RRRLT600 will fit the RetraxPRO XR tonneau cover for your truck, and the crossbars also come with the hardware needed to install in the T-slots on the cover.

expert reply by: Kyle S

0

Joe S.

6/20/2024

Great for confirming. Laced an order. Thanks????

Answer 1

I don't know which Ride88 bike rack you own but the cannister for every one of the retractable tonneau covers sits at the front of the bed. We don't offer these bike racks but from what I can tell from their website they won't be…

view full answer...

Answer 2

The 71" Rhino-Rack Vortex Crossbars for Retrax XR Tonneau Covers item #RRVA180B-RRRLT600 are the correct set for your 2022 Ram 3500. These are made for full size trucks and fit in the rails of the Retrax PRO XR. These crossbars are exactly…

view full answer...

Answer 3

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 4

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 5

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 6

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 7

Since wire color codes are NOT universal, we always recommend wiring by function, rather than wire color. If you look at the Trailer Wiring FAQ article I have linked you to, you can see some diagrams showing the proper way to wire a vehicle and…

view full answer...

Answer 8

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 9

Hi David! There are quite a few hitches offered for your 2026 Honda Odyssey, so I definitely understand wanting to know the differences. There are basically three styles available for you and I have them broken out below: Exposed Crosstube: etrailer…

view full answer...

Answer 10

The main difference between the Curt Trailer Hitch Receiver part #C13416 and the EcoHitch Hidden Trailer Hitch Receiver part #EH97FR is that the EcoHitch has a completely hidden cross tube whereas the Curt cross tube will be visible from the rear of…

view full answer...

Answer 11

Hey Greg! Yes, the Rhino-Rack Quick Mount Legs for Sportz Crossbars #RRRLT600H will fit the T-slot rails on your RetraxPRO XR. For a set of four under one part number we have the #RRRLT600. Regarding the clearance, the handle won't clear as is so…

view full answer...

Answer 12

Hey Don, thanks for the information! That's a significant amount of sag and a pretty heavy trailer, I recommend the Hellwig Pro Series Helper Springs item #HE79FR for the higher 2,500 lbs capacity. I doubt you're driving around with your bed…

view full answer...

Do Rhino-Rack Crossbars Fit RetraxPRO XR Tonneau Cover & Come With Mounting Hardware

Continue Researching