How To Connect Trailers 4-Way Flat To Hydrastar Electric Over Hydraulic Actuator # HS481-8067

Updated 02/17/2026 | Published 06/11/2024

Products Featured in This Question

Hydrastar Vented Marine Electric Over Hydraulic Actuator for Disc Brakes - OEM - 1,600 psi

(29)

$1230.61

Pollak 7 Pole to 4 Way Connector Adapter

(1085)

$9.07

Question:

I am looking at this Hydrastar electric over hydraulic marine actuator plug and play kit which seems to inlcude everything needed. My trailer currently has surge brakes, so in addition i will obviously need a coupler AND- with my current 4 flat wire- how do the trailer lights hook up to this plug and play system- is another connector needed? I assumevthe 7 way that plugs in to the actuator goes diectly into the round female plug on my bumper, and the breakaway and adapter attach to the other plugs coming from the actuator. How dobthe teailer lights connect and get power?

asked by: John K

Expert Reply:

As your trailer has a 4-way you simply need an Adapter # PK12716 to connect to the Hydrastar Vented Marine Electric Over Hydraulic Actuator # HS481-8067. The actuator, breakaway battery and module will all plug into each other through the included connector on the 7-way harness.

If you need help selecting the correct coupler to replace your surge coupler I would need to see what you have along with the weights for the trailer.

expert reply by: Bud M

Katrina D.

2/17/2026

Hey, how did things go getting the Hydrastar actuator connected with the 4-way adapter? Your experience could point others in the right direction when upgrading from surge brakes.