Does The Yakima Boatloader EVO Fit The Yakima JetStream Crossbars?

Question

Question:

Does the Yakima Boatloader EVO accessory fit the Yakima Streamline crossbars? If no, does Yakima make another accessory that serves the same purpose?

asked by: John G

0

Expert Reply:

Hello again, John. The Yakima BoatLoader EVO Telescoping Load Assist # Y04085 will only work with the Yakima Roundbar and Corebar crossbars. It will not work with the Yakima JetStream crossbars that I recommended earlier. Instead, I recommend using the Rhino-Rack Universal Load Assist # RR-RUSL.

expert reply by: Jesse M

0

Answer 1

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 2

Hey Jonathon thank you so much for all of that additional information! To haul your bikes behind your class C Sprinter motorhome, while flat towing your Mini, I recommend the Hollywood Racks RV Rider Bike Rack item #HLY64FR and the Roadmaster Dual…

view full answer...

Answer 3

Congrats on the new motorhome Edward! SnapPad doesn't have the 2026 Allego Red 38 KA in their system so I don't know what size your jack feet are. However, we have a few options that will work with the HWH leveling systems. What you'll…

view full answer...

Answer 4

Hey Kelvin, welcome back. To flat tow a 2026 Ford Maverick with your Demco Commander II Tow Bar item #DM9511012, I recommend the following parts: Baseplate Kit - Demco Tabless Base Plate Kit item #DM38CV Wiring Harness - Roadmaster Diode 7-Wire to…

view full answer...

Answer 5

Hey Jason, whenever available I would recommend going with the channel attachment for roof rack accessories including the Thule Hullavator part #TH898 as its simpler stronger, and it's basically the future of most roof rack accessories as it…

view full answer...

Answer 6

Hey John, we'd be glad to help you pick out the best lift assisted kayak carrier for your 2026 Subaru Outback Wagon! I think the Thule Hullavator part #TH898 would be your best option as it is a little easier to use and load so that's what I…

view full answer...

Answer 7

Hello John, thanks for reaching out. Yes, we do have a Thule roof rack that will allow you to install the Hullavator #TH898 on your 2015 Subaru Forester. For that I recommend the following: - Thule WingBar Evo Roof Rack for Raised Rails - Aluminum -…

view full answer...

Answer 8

Hello David, great question. So, there is a chance that you will have to enlarge the access holes for the both the etrailer #e98912 hitch and the EcoHitch #306-X7365. Both hitches come with the same size spacers. The picture below will help…

view full answer...

Answer 9

Hey Howard, thanks for the information. The Malone AirFlow2 Roof Rack item #MAL74AR, you referenced, will indeed fit the raised roof rails on your 2024 Subaru Crosstrek WILDERNESS edition. These 50" long x 3" wide x 1" tall crossbars…

view full answer...

Answer 10

Hi Marcy! The etrailer hitch for your 2024 Subaru Crosstrek is the etrailer Trailer Hitch Receiver - Custom Fit - Matte Black Finish - Class III - 2" #e98912 you found. We did an install of this on a 24 Crosstrek and I have that video included.…

view full answer...

Answer 11

Hey Jim, You are right that both of those hitches, #C13382 and #C22MJ, fit a 2025 Crosstrek. Capacity wise these hitches are rated for the same 3,500lb capacity. The main difference comes down to the trim of the vehicle. The #C22MJ is not intended…

view full answer...

Answer 12

It sure does! The etrailer Hitch item #e98912 has been confirmed to fit the 2024 Subaru Crosstrek Wilderness.This hitch is custom fit and bolts to your Subaru with included hardware. This is a class III hitch with a 2" receiver. It has a 3,500…

view full answer...

Does The Yakima Boatloader EVO Fit The Yakima JetStream Crossbars?

Continue Researching