Recommended BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers on a 2011 Honda Civic

Question

Question:

I need baseline rack clips for a Yakima rack I see that you have them : part 8006148 and 8006150 are these genuine Yakima parts or made by another company?

asked by: Hollie S

0

Expert Reply:

Hey Hollie. The BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers item # Y06148 and item # Y06150 are indeed genuine Yakima parts. They are not made by another company. They're going to allow you to mount a set of crossbars to your 2011 Honda Civic. These are custom fit and secure to the roof inside the door jams.

The BaseClip Fit Kit item # Y06148 and item # Y06150 work with the BaseLine Towers for Yakima Crossbars item # Y28TR. The 60" Long Yakima JetStream Crossbars item # Y00426 are what's recommended for your Civic.

What do you plan on using your roof rack for?

expert reply by: Jerred H

0

Y06148
(click to enlarge)

Hollie S.

8/6/2026

I don't have a civic, unclear where that info came from. I need to re-do the rack on a Accord, and sometimes the clip pads do no come off intact. But goof to know they are the real deal

Jerred H.

8/7/2026

@HollieS You asked about parts for a 2011 Honda Civic in March. What year Accord do you have?

Answer 1

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 2

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 3

Hey Jason, whenever available I would recommend going with the channel attachment for roof rack accessories including the Thule Hullavator part #TH898 as its simpler stronger, and it's basically the future of most roof rack accessories as it…

view full answer...

Answer 4

Hello John, thanks for reaching out. Yes, we do have a Thule roof rack that will allow you to install the Hullavator #TH898 on your 2015 Subaru Forester. For that I recommend the following: - Thule WingBar Evo Roof Rack for Raised Rails - Aluminum -…

view full answer...

Answer 5

Hey Hollie. The BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers item #Y06148 and item #Y06150 are indeed genuine Yakima parts. They are not made by another company. They're going to allow you to mount a set of crossbars to your 2011 Honda…

view full answer...

Answer 6

Hey Bill! You aren't finding the fit kit because Thule discontinued the one for rails and doesn't have a replacement right now. My recommendation is to install a Yakima roof rack instead. This will still fit the Thule tracks, and their…

view full answer...

Answer 7

It sure is Doug and congrats on your new truck! The TruXedo Pro X15 Soft Tonneau Cover item #TX33TV has been confirmed to fit your new 2026 Ford Maverick. The TS Rails item #TH25FR are going to fit alongside the rails of the Pro X15 item #TX33TV on…

view full answer...

Answer 8

Hi Philip! The shocks on the Yakima Rack and Roll Trailer #Y08107 actually use a pin instead of a bolt. That is the Replacement Shock Pin for Yakima Rack and Roll Trailer #8880182. This has a 14mm diameter and has 4-1/2" of useable length. If…

view full answer...

Answer 9

The Swagman Exo Aero Rooftop Kayak Carrier System #S65145 will fit the round crossbars on both sizes of Yakima Rack and Roll trailer, parts #Y08107 and #Y08106. These trailers have a 250-lb weight carrying capacity unless you have the 78-inch version…

view full answer...

Recommended BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers on a 2011 Honda Civic

Products Featured in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching