Is There a Light and License Plate Kit Available for the Yakima EXO System

Question

Question:

Is a license plate mount and/or light kit available for this? I plan to put the box above a fully-loaded gear warrior on a 2022 Rav4.

asked by: Paul F

0

Expert Reply:

Hey Paul, yes there is a license plate kit available for the Yakima Exo storage kits like the part # Y44ZR that you referenced. For that all you nee dis the part # Y74VR which puts lights and a license plate bracket onto the storage box.

expert reply by: Jameson C

0

Answer 1

The wiring for the Yakima License Plate and Tail Light Relocation Kit #Y74VR will have connections to a main harness that plugs into a 4-way flat trailer connector. It then has separate connectors for each of the taillights as well as the license…

view full answer...

Answer 2

Yes, there is a way to secure the accessories to the Yakima EXO Swing Away Cargo Carrier item #Y72VR. The Swing Away base has Yakima's Same Key System (SKS) locks built in that secures the accessories to the base. These cores are included but can…

view full answer...

Answer 3

The license plate bracket item #Y74VR isn't needed or required to use the Yakima EXO Swing Away Carrier and Cargo Box item #Y94ZR but it is recommended to avoid any potential traffic stops. You're not supposed to block your rear license plate…

view full answer...

Answer 4

I was able to locate the interior dimensions of the Yakima GearWarrior Cargo Carrier for Modular EXO System #Y37VR and can confirm that the Yeti 210 cooler is not going to fit as this basket has interior measurements of 21" W and 54.39" L.…

view full answer...

Answer 5

When using the change key part #Y8007835 to remove and replace a lock cylinder what you have to do is first have the lock in the unlocked position. Next you will insert the change key into the core. With the key in the core you will then be able to…

view full answer...

Answer 6

Hi Dan; I believe Yakima actually has tested this which is why they specifically state in their EXO guidelines "EXO is NOT suitable for RV" under their warnings. As great as it would be to use it you wouldn't want to find that you lost…

view full answer...

Answer 7

Hey there David, good question. I see what you mean about your 2020 Winnebago Boldt (nice RV by the way) on the sprinter 3500 having a ladder that could interfere with the Yakima EXO Swing Away Storage System w/ Enclosed Cargo Carrier and Rack…

view full answer...

Answer 8

Hey there Ray; yes you can mix a cargo box and a bike rack on the Benton cargo rack system for 2" hitches #B42FR. This setup has a lot of versatility with 2 pairs of crossbars to support full-size accessories like cargo boxes, bike trays, and…

view full answer...

Answer 9

Hey Doug, congratulations on the new truck and trailer! That is a nice setup for sure. Unfortunately, the backup cameras aren't going to integrate with your dash cam system. Since you're already prepped for Furrion, and it is the best on the…

view full answer...

Answer 10

Hello Andrew, Well that sounds like quite the fun trip, what state or states will you be traveling through? You're asking a really important question, especially since you're planning a cross-country trip with about 250 pounds of bikes and…

view full answer...

Answer 11

Hi Ron; looking at pictures you have the right kind of bumper on the rear of your 2023 Entegra Vision 29S. However, I would go ahead and measure it just to make sure the 24x84 etrailer Cargo Carrier #e96ZR will fit. This is designed to for 4" x…

view full answer...

Answer 12

Hey, Marcus. You can definitely use the CVT Timber Creek Annex part #RG35ZV with your A.R.C Mx Camper Shell. I was checking it out with our demo team last year and we had it set up on a larger SUV — there was still plenty of extra material, so you’ve…

view full answer...

Is There a Light and License Plate Kit Available for the Yakima EXO System

Products Featured in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching