120V Refrigerator To Replace A Dometic Refrigerator RM1350SLM Model 958703831

Question

Question:

I would like to replace my Dometic Refrigerator RM1350SLM, model 958703831 with a basic 120 Volt residential refrigerator freezer. Do you carry a suitable replacement?

asked by: Debra F

0

Expert Reply:

Hello Debra. Our best option for a 120v refrigerator to replace your Dometic refrigerator will be the Everchill RV Refrigerator w Freezer Drawers # EV87FR. This will be a bit larger than you Dometic fridge and it requires the cutout to be at least 37-7/16" wide x 84-1/2" tall x 28-3/4" deep, so please do confirm that this will fit in your space. This model has french doors and two freezer drawers. It comes in a black stainless steel which is durable and easy to clean.

expert reply by: Jesse M

0

Debra

5/21/2024

Jesse, Thank you for your quick response, however, I can only go smaller, not larger. Debra

Jesse M.

5/21/2024

@Debra We do offer a couple of 120v mini fridges. Our smallest "full size" 120v fridge will be the Everchill I mentioned above. You can use the following link to see our full selection of 120v fridges. https://www.etrailer.com/dept-pg-RV_Refrigerators-gw-120V_%7E_Shore_Power.aspx

Helpful Links

dept-pg-rv_refrigerators-gw-120v_%7e_shore_power.aspx

Answer 1

Hey Matt, so the correct Reese Goose Box you'd need for your 2024 Jayco Eagle 29DDB would be the part #RP85FR which fits the Rhino as well as the other standard Lippert pin boxes that your Jayco would have came with although we are pretty sure it…

view full answer...

Answer 2

The latching mechanism of your gooseneck trailer coupler needs to wrap around the neck of the hitch ball and does not latch to the top of the ball your like your picture and description implies. You would not be safe to continue to tow like this as a…

view full answer...

Answer 3

Sure we'd love to help you replace your axle, but we are going to need a couple more things in order to do so. First thing you are going to need is determine the axle capacity. Typically this information can be found on a sticker somewhere on the…

view full answer...

Answer 4

Hey Roger, thanks for reaching out! The Hopkins Endurance 5th Wheel/Gooseneck 90-Degree Wiring Harness #41157 tees into the US CAR connector at the back of your 2020 Ram 2500 7-Way bumper plug and gives you a way to plug your trailer wiring in inside…

view full answer...

Answer 5

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 6

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 7

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 8

Hey Andrew! Yes, Furrion does have a Chill Cube model with a heat pump. This was actually just released for aftermarket sale. You will need a complete system to make the switch, new R32 units aren't backwards compatible with old R410A systems.…

view full answer...

Answer 9

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 10

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 11

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Answer 12

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

120V Refrigerator To Replace A Dometic Refrigerator RM1350SLM Model 958703831

Product Page this Question was Asked From

Continue Researching