Can A 2K Idler Hub With A 4 On 4 Bolt Pattern Be Swapped To A 5 On 4.5 Bolt Pattern

Updated 05/14/2024 | Published 05/12/2024

Products Featured in This Question

Dexter Trailer Idler Hub Assembly for 2,000-lb E-Z Lube Axles - 4 on 4 - L44649 Bearings

(915)

$65.12

Trailer Idler Hub Assembly for 2K Axles - 10" to 12" Wheels - 5 on 4-1/2 - Pre-Greased

(1533)

$43.32

Replacement Trailer Wheel Bearing - L44649 - Qty 1

(2216)

$24.70

Timken Hi-Temp Red Grease for Disc and Drum Brakes - 1-lb Tub

(77)

$12.27

Question:

I wanted to know if there is a way to conversion my dexter axle 2000 pounds from 4x4 to 5x4.5. The current hub that is on my trailer is part 8-91-05UC1

asked by: Scott

Expert Reply:

Hey Scott,

The Dexter Trailer Idler Hub Assembly for 2,000-lb Axles # 8-91-05UC1 uses bearing # L44649 for both the inner and outer bearing so you would be able to easily swap it out with the etrailer Trailer Idler Hub Assembly for 2K Axles # AKIHUB-545-2-2K. This hub comes with the bearings, races, seal, grease cap, and lug nuts all included and is already pre-greased so all you'll need to do is grease # TMK79ZR the spindle and slide the hub into place.

expert reply by: Kevin C