What Draw-Tite Trailer Hitch Fits 2020 Lexus ES 300h

Question

Question:

The part I am looking for is Draw tite 36643 class 2 trailor hitch for a 2020 lexus es300h

asked by: Scott S

0

Expert Reply:

Hey Scott,

We do have the exact Draw-Tite hitch that fits your 2020 Lexus ES 300h and it is indeed the part number you referenced:

- Draw-Tite Trailer Hitch Receiver # 36643

expert reply by: Kyle S

0

Answer 1

Hi Stacey! I'm sorry to say that the only custom hitches available for the 2023 E-450 fit the sedan models. If you want to add a hitch to your E-450 wagon you can take the #E-9 to a local fabricator and have them fashion a custom hitch for your…

view full answer...

Answer 2

Hey Matthew, out of the three hitches you're going to want the Curt Trailer Hitch Receiver #C22UR. This one sits the highest off the ground at 11" from the ground to the top of the receiver opening. Still not super high up, but not terribly…

view full answer...

Answer 3

I would be more than happy to recommend a trailer hitch for your 2022 Toyota Sienna. Both the Draw-Tite #DT55MR and Curt #C22UR have identical designs when it comes to mounting bracket installation and hitch height so I recommend going with the Curt…

view full answer...

Answer 4

I would be happy to clarify! You are correct that for your 2021 Subaru Forester there are two different Class III trailer hitch receivers available, the Curt #C13409 and the Curt #C47HR. The main difference between these two hitches is the #C13409…

view full answer...

Answer 5

The highest weight rated trailer hitch we have to fit the 2014 Ford C-Max is the Curt Trailer Hitch Receiver #C12092. The trailer hitch has a maximum gross trailer weight up to 3,500 lbs and maximum tongue weight up to 350 lbs, but keep in mind that…

view full answer...

Answer 6

I do have a solution for you, however there isn't a 2" receiver available for your Toyota Camry. The Camry just does not have the capacity to match what a 2" receiver offers. You can use the Curt #C11576 1-1/4" Class-I hitch and…

view full answer...

Answer 7

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 8

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 9

The main difference between the Curt Trailer Hitch Receiver part #C13416 and the EcoHitch Hidden Trailer Hitch Receiver part #EH97FR is that the EcoHitch has a completely hidden cross tube whereas the Curt cross tube will be visible from the rear of…

view full answer...

Answer 10

Hey Ricardo! Yes, the Curt Trailer Hitch Receiver #C82RJ is the hitch Curt is working on for the new 2027 Telluride. This is a pre-order since Curt hasn't finished the design. It does not include wiring. The wiring harness for the 2027 is also up…

view full answer...

Answer 11

Hi David! There are quite a few hitches offered for your 2026 Honda Odyssey, so I definitely understand wanting to know the differences. There are basically three styles available for you and I have them broken out below: Exposed Crosstube: etrailer…

view full answer...

Answer 12

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

What Draw-Tite Trailer Hitch Fits 2020 Lexus ES 300h

Continue Researching