Will K-Source Snap & Zap Custom Towing Mirrors Scratch Paint on 2023 Ford F-150 Tremor Mirrors

Question

Question:

I have a new 2023 ford f150 tremor Azure grey with painted mirrors. My question will these fit my factory mirrors without scratching the paint Thanks. Tim

asked by: Tim H

0

F-150 Mirror
(click to enlarge)

Expert Reply:

The K-Source Snap & Zap Custom Towing Mirrors # KS69NQ won't scratch the paint on your 2023 Ford F-150 Tremor. They have pads to protect your mirror at the points of contact and a snug fit to minimize vibrations.

expert reply by: Robin H

0

Answer 1

Hey Kyler, thanks for reaching out! **UPDATE IN COMMENT SECTION - JUMPER LOCATION IS DETERMINING FACTOR** The Progressive Dynamics Replacement Section #PD4655V is compatible with lithium batteries. There is a button on the board (see photo) that…

view full answer...

Answer 2

Hey Brian. To convert the WFCO WF-8955PEC to be lithium compatible you'll need the Progressive Dynamics Replacement Section for AC/DC Power Distribution Panel item #PD4655V. This converter section is specifically designed to replace yours. It…

view full answer...

Answer 3

Yes, it will! The Parallax/Magnetek or WFCO RV Power Centers #PD4655V will work with Lithium batteries like the Lifepo you mentioned, flooded lead acid, AGM, and gel batteries.

view full answer...

Answer 4

To convert the WFCO WF-8955PEC to be lithium compatible you'd need the part #PD4655V and you'd be set. This fits in the panel without any modifications.

view full answer...

Answer 5

Hey James, yes the Progressive Dynamics 4000 Series part #PD4060K would be correct to replace what you have now and does have a Lithium battery charge profile. You could definitely install this by yourself.

view full answer...

Answer 6

I would certainly recommend the 1/2-inch wire loom #459075-1. It will hold two jacketed 2 wire 10-gauge wire and three jacketed 2 wire 12-gauge wire. See pictures to the right. In addition, I was able to fit comfortably eleven individual 16-gauge…

view full answer...

Answer 7

Hey Todd! At the lowest setting, the saddle of the Power Mountain Tallboy Off-Road Bottle Jack #PM34FR sits at 14" and the top of the saddle arms are at 15-3/8". I took a photo of it out in our warehouse, and while I wasn't able to get…

view full answer...

Answer 8

The K-Source Snap & Zap Custom Towing Mirrors - Snap On - Driver and Passenger Side #KS69NQ are specifically designed to fit the mirrors on your 2021 Ford F-150. These have pads on them where they contact the mirror housing to prevent scratches.…

view full answer...

Answer 9

Since Lithium batteries require a higher voltage to charge you are correct, you do need something between the 12 volt accessory circuit of your Tundra's 7-way and the battery. What you'd want is the Redarc In-Vehicle BCDC Battery Charger…

view full answer...

Answer 10

Hey Jack, we have chargers designed specifically for this situation with the Redarc BCDC charger part #331-BCDC1225D this will connect to your truck's charge wiring and will then convert the charge to a voltage that can charge a lithium battery…

view full answer...

Answer 11

The only potential issue I can see happening is if the converter in your 2017 Lance 1475 camper isn't rated for lithium batteries. If that's the case then we have the Progressive Dynamics Replacement Section for AC/DC Power Distribution Panel…

view full answer...

Answer 12

Hey Joe, great question. You’re thinking about it the right way. You can technically run the charge line from the 7-pin’s 12V power wire straight to the positive post on your battery, but with lithium you’ll want to do it safely. Your truck’s…

view full answer...

Will K-Source Snap & Zap Custom Towing Mirrors Scratch Paint on 2023 Ford F-150 Tremor Mirrors

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching