Will The CIPA Custom Towing Mirrors CIP38MR Fit A 2024 Chevy Silverado 2500 HD?

Question

Question:

hi there.do these cip38mr mirrors fit a 2024 silverado 2500 hd regular cab 2 door? thank.Terry

asked by: Terry

0

Expert Reply:

Hello Terry. The CIPA Custom Towing Mirrors # CIP38MR are indeed made to fit the 2024 Chevy Silverado 2500 HD regular cab 2 door. Just keep in mind that there are a few exclusions. These mirrors will not fit vehicles with the perimeter lighting system. Also, they will not fit mirrors with additional lighting features that are not flush to the mirror, such as turn signals, automatic dimming, and puddle lights. For mirrors with features that are flush to the mirror, product will fit but those functions may be lost.

You will find a review and installation video for these mirrors linked below.

expert reply by: Jesse M

0

Terry

5/5/2024

thanks for the reply. is there another product number for these mirrors? here in ontario canada i have been to two different truck accessory dealers and neither one has been able to access a number to order a set of these mirrors for me. they have been trying to find the #cip38mr mirror set. thanks in advance. terry

Jesse M.

5/6/2024

@Terry The part number # CIP38MR is our own unique part number for the pair of CIPA mirrors. The manufacturer part numbers are as follows: 10971 CIPA Custom Towing Mirror - Slip On - Driver Side 10972 CIPA Custom Towing Mirror - Slip On - Passenger Side

Terry

5/6/2024

@JesseM thanks for the fast reply. terry

Jesse M.

5/6/2024

@Terry Anytime!

Answer 1

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 2

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 3

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 4

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 5

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Answer 6

It sounds like you are speaking of the wires for the brake magnets. If this is correct, you will need to connect one of the wires to the brake controller output wire on your trailer connector and the other wire will need to be grounded to a clean…

view full answer...

Answer 7

The 5.30-12 tires, being wider, are going to make more contact with the road. This means that the noise, and heat build up will be higher than a 4.80-12 tire but the rolling resistance will actually be less because the tire is larger diameter. The…

view full answer...

Answer 8

The #84 spindle is just a common way to identify the spindle dimensions typically used for 3,500 lb axles. So instead of listing out the parts, people can just say they have #84 spindles and it's easier to know what fits it. The CE Smith Trailer…

view full answer...

Answer 9

Even though I cannot comment specifically on the grease you used because I am not familiar with it, I can tell you the best grease for trailer bearings is a a grease with a rating of GC-LB, which just means it is made to withstand very high…

view full answer...

Answer 10

The Demco Hydraulic Trailer Brake Actuator part #DM72VR should be a direct replacement for the Atwood 61101 Brake Actuator that you have now. This newest updated it rated at 7K instead of 6K. This is a bolt on option that mounts on 3" centers.…

view full answer...

Answer 11

Hey Bryan, that's a good question. The pricing can definitely be misleading, but I wouldn't use it to judge the quality of the tire. A lot of that comes down to promotions, inventory, and whether you're looking at a tire by itself or…

view full answer...

Answer 12

The difference between an load range C and load range D tire in the same size is the capacity and psi rating. The two tires will still have the same dimensions and fit on the same wheel. The D rated tire has a higher capacity. For a ST175/80D13 like…

view full answer...

Will The CIPA Custom Towing Mirrors CIP38MR Fit A 2024 Chevy Silverado 2500 HD?

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching