4-Way Flat Wiring Harness and Submersible Tail Lights For a Boat Trailer Over 80" Wide

Updated 04/16/2024 | Published 04/15/2024

Products Featured in This Question

25 Ft 4-Way Trailer Wiring Harness - Wishbone Style - 25' Ground

(283)

$28.55

Optronics LED Combination Trailer Tail Lights - Submersible - 40 Diodes - Driver and Passenger Side

(3275)

$55.83

Question:

Good afternoon, I was looking through FAQ section and think I found my answer, I just want to clarify. I have to replace the trailer wires on my boat trailer. First, it is over 80 wide. The wiring harness on it had 8 wires coming from the flat 4 connector. The trailer has 2 up front small 3/4 inch leds lights, one on either side, 2 lights in front of the wheels, one either side and the rear running, blinker and stop Led lights. Im going to need a flat 4 wishbone wiring harness, where 3 wires run down each side of the trailer. Do you offer a harness and submersible rear tails lights?

asked by: Glenn W

Expert Reply:

The 25 Ft 4-Way Trailer Wiring Harness # A25W2GWB you found is going to have the 3 wires which run down each side of the trailer. One wire on each side is going to be a ground wire(white), the 2nd wire(brown) is going to be for the running lights and side marker/clearance lights and the 3rd wire(green or yellow) is going to be for the turn signal/brake lights for each side of the trailer. The Optronics LED Combination Trailer Tail Lights # TLL160RK are submersible and the correct size needed for your trailer being over 80" wide.

expert reply by: Bud M