Can I Swap Out 4.80x12 Tires for 20.5x8x10 Tires for More Stability?
Updated 06/27/2024 | Published 06/19/2024
Question:
I have a 24ft scissor trailer and 24ft pontoon with 4.80x12 tires on it. Was wandering if I could put 20.5x8x10 tires for more stability. Thanks Jerry
asked by: Jerry B
Expert Reply:
That's a great question! Let's find out together Jerry.
The 4.80x12 tires currently on your trailer measure 20.5" in diameter and are 4.9" wide. The 20.5x8x10 which is equivalent to a 205/65-10 tire like item # AM1HP56 is 20.4" in diameter and 8.4" wide so height wise you are good! No need to worry about fender clearance.
The 205/65-10 tire item # AM1HP56 is definitely going to give you a wider foot print which means more stability. So long as you use a zero offset rim the only problem I can see you running into is the tires sticking out from the fenders a bit. If you're ok with that then you will be good to upgrade your boat trailer's tires.
If you would like a recommendation on rims feel free to email me directly or comment below what size lug pattern is currently on your trailer.
Product Page this Question was Asked From
Loadstar K399 Bias Trailer Tire - 205/65-10 - Load Range E
- Trailer Tires and Wheels
- Tire Only
- Bias Ply Tire
- Load Range E
- 205/65-10
- 10 Inch
- N - 87 mph
- Kenda
more information >
Continue Researching
- Search Results: seal
- Shop: Loadstar K399 Bias Trailer Tire - 205/65-10 - Load Range E
- Search Results: 7 x 1~1/4 inch drum trailer brakes
- Search Results: 205 65 10
- Search Results: valve stems
- Search Results: trailer tires and wheels
- Shop: etrailer Boat Trailer Jack w/ Dual Wheel - Sidewind - Swivel - 10-3/8" Lift - 1,500 lbs
- Shop: Kenda 205/65-10 Bias Trailer Tire with 10" Galvanized Wheel - 5 on 4-1/2 - Load Range E
- Shop: Loadstar K399 Bias Trailer Tire - 205/65-10 - Load Range C
- Shop: Steel Trailer Wheel - 10" x 6" Rim - 5 on 4-1/2 - Galvanized Finish
- Shop: Americana High Pressure Rubber Snap-In Valve Stem - 1-1/4" Long - Up to 100 psi
- Search Results: trailer spindles accessories and parts
- Search Results: spindle washer
- Q&A: Tang Washer for 1-1/6 Inch Spindle
- Q&A: Proper Orientation of Trailer Electric Brake Assemblies
- Shop: Complete Bearing Kit with L44649 Inner/Outer Bearings and 10-9 Grease Seal Fits 1.063" Spindles
- Q&A: Spindle Washer Compatibility With 1 Inch Spindle Without D-Shape
- Q&A: How To Find Correct Replacement Electric Braking Assembly Parts for a Trailer
- Q&A: Connecting Ground Wires From Optronics 25' Trailer Wiring Harness With Tail Lights Ground Strap
- Article: Trailer Wiring Diagrams
- Shop: Trailer Hitch
- Q&A: What is the Difference Between a Class II and a Class III Hitch?
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Shop: Trailer Wiring
- Q&A: Lug Nut Torque Chart for Trailer Wheels
- Article: How to Measure for Trailer Hitch Drop
- Shop: Brake Controller
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Video: A Look at the Power Mountain Tallboy 6 Ton Off-Road Bottle Jack with a Military Cargo Trailer
- Article: How to Measure Your Trailer Wheel Bolt Pattern
on Trailer Tires and Wheels
Jerry B.
6/27/2024
Thanks, I don't have fenders on the pontoon trailer.