Replacement Lid Lifter Assembly for Ventline Roof Vent with VD0434 On Screen

Question

Question:

I have a ventine VD0434 roof vent on my 2016 Lance travel trailer trailer model 2185. I need the vent gearbox, arm, and handle. This part looks like it will fit, but I want to be sure since my model isn’t listed. Also looking for the screen for my VD0434 vent.

asked by: Jeremy

0

Ventline Knob
(click to enlarge)

Expert Reply:

Hey Jeremy, thanks for the picture of your roof vent based on seeing that what you'd need is the part # BVD0462-00 that you referenced. Then for a replacement screen you'd want the part # BVC0573-31.

expert reply by: Jameson C

0

Answer 1

Thank you for the picture! The problem you are running into has more to do with the lug nuts you are using than the tire wrenches like part #PTW1 that you referenced. Since the Kenda Karrier S-Trail #AM31215 is a little more recessed where the lug…

view full answer...

Answer 2

The Replacement Screen for Ventline Ventadome Trailer Roof Vents part #BVD0434-31 is used on the following Ventline models; V2092, V2110, V2094 and V2119. If you have the V2092, V2110, or V2119 then you'll need the Replacement Screen Frame with…

view full answer...

Answer 3

I do have a replacement screen available for the Ventline Ventadome VD0433 Trailer Roof Vent that you have on your trailer but they do not make a non-removable version that will work for you. Instead, I recommend replacing the screen with part…

view full answer...

Answer 4

The replacement screen frames for the trailer roof vent on your 2011 Grey Wolf come in two different colors. For the Polar White you will need part #BVC0573-41. For the Birch White you will need part #BVC0573-31.

view full answer...

Answer 5

The direct replacement for your Ventline screen with model number VD0434 is #BVD0434-31 (birch white) or #BVD0434-41 (polar white). This is compatible with Ventline Ventadome roof vent models V2092, V2110, V2094 and V2119. However, if you're…

view full answer...

Answer 6

We offer all kinds of trailer vents and vent replacement parts including Operator Sub-Assembly and Arm kits like #BVD0462-00 and #BV0115-04. These and other such kits are shown on the linked page. You will want to try to find some brand and/or part…

view full answer...

Answer 7

The Replacement Gear Motor with Pinion Gear #BVB0601-00 is the correct replacement for the Ventline Ventadome roof vent model V2119. It sounds like you also need the Replacement Operator, Knob and Screw for Ventline Ventadome Trailer Roof Vents…

view full answer...

Answer 8

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 9

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

view full answer...

Answer 10

The three most common lug stud sizes for a trailer are 1/2"-20, 9/16"-18, and 5/8"-18. In order to make sure you get the correct lug nuts you need to measure the lug studs on the trailer now as we have no way to look this up for…

view full answer...

Answer 11

I'm not quite sure what you mean by the "heart", however for your Ventline VD0434 we have the replacement screen frame #BVA0444-32, the replacement lid #BVD0449-A01, and the replacement ceiling garnish #VA0445-28 all available for…

view full answer...

Replacement Lid Lifter Assembly for Ventline Roof Vent with VD0434 On Screen

Products Referenced in This Question

Product Page this Question was Asked From

Continue Researching