Replacement Side Marker Camera For An RV Camera System

Question

Question:

Im looking for a replacement side camera my current one only shows black and white. I see I already made a mistake. thanks for your input. Jon

asked by: Jon

0

Expert Reply:

Hey Jon,

In order to make sure you're getting the correct replacement I'll need to know what system you have first. If you want to email me some pictures of the system or if you have a brand and model number available I can look up what you have as well.

expert reply by: Kevin C

0

Jon

4/10/2024

Kevin, Thanks for your support. I got it figured out the model I have is discontinued. You have the set I'm needing I'll have to check with wife to make sure it's still ok with her. Jon

Kevin C.

4/11/2024

@Jon No problem, if you have any other questions or need help picking out any other parts just send in another comment or question and I'd be happy to help.

Answer 1

Hey Peter! Since the Furrion Vision S is being phased out for the Vision S + the driver's side camera is no longer available. This was discontinued almost a year ago, and we no longer have any in stock. The only option we have right now is the…

view full answer...

Answer 2

The passenger side replacement Furrion Vision S camera is the part #FR28NR.

view full answer...

Answer 3

Hey Alan, thanks for reaching out and providing all of the details! Sounds like you're needing the Replacement Water Valve #TH78SA for Thetford Aqua-Magic Style II RV Toilets. Were there any other parts you're needing at this time?

view full answer...

Answer 4

The trigger wire on both the Drivers #FR85MR and Passenger #FR28NR side cameras is not required if your camper does not have a turn signal function on the front side marker lights. Without having the trigger wire available this simply means you will…

view full answer...

Answer 5

Yes, you can upgrade the 4.3 inch monitor of your Furrion setup to the 7 inch #FR47FR or the #FR97FR for the 5 inch. This will work great and give you an easy to view monitor.

view full answer...

Answer 6

Hello Ken, thanks for reaching out. Sadly, the Furrion Vision S camera system is being discontinued and replaced with the Vision S+. The camera for the Vision S+ is not backwards compatible with the Vision S system, so sadly if your camera is bad,…

view full answer...

Answer 7

So you likely have one of 2 issues. First if you have the 4.3" monitor it will only pair with one camera and you would need either the 5" #FR97FR or 7" #FR47FR to pair with the additional cameras. Also it could be you do not have the…

view full answer...

Answer 8

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 9

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 10

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 11

You can use the RV Propane Gas Detector #RS64FR (white) or #RS44FR (black) to replace your current Atwood 31013 propane gas detector. This will also use a 12v, 2-wire installation like your current detector.

view full answer...

Answer 12

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Replacement Side Marker Camera For An RV Camera System

Product Page this Question was Asked From

Continue Researching