Locks Needed For 2-1/2 Inch Hitch Receiver And Coupler On Trailer  

The Master Lock 970DPF will not work with the Blaylock EZ Lock Trailer Coupler #BLTL-33; instead you would want to use the Master Lock Padlock #ML40D.

The Master Lock Trailer Coupler Lock #377DAT you purchased can accommodate a max coupler width (including lip) of 4 inches , so for a lock that works with up to a 4-3/4 inch coupler width, I recommend the Blaylock EZ Lock Trailer Coupler Lock…

The EZ Lock Trailer Coupler Lock for 1-7/8", 2", 2-5/16" Bulldog Collar-Lok Couplers #BLTL-20 is specifically designed for a collar lock style coupler like #BD028657. For a standard travel trailer, you most likely do not…

If you have the Fastway Universal Coupler Lock for 1-7/8", 2" and 2-5/16" Couplers - Key 301 Item #FA86-0015-301 you will need the 301 replacement key part #FA-KEY-30. The replacement comes with two tube keys so I suggest…

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

There is only one difference between the Curt Trailer Hitch Receiver #C13176 and etrailer Trailer Hitch Receiver #e98909 that fit your 2020 Chevrolet Colorado, which is the finish. The Curt trailer hitch has a glossy black finish while the etrailer…

That's a very good question, we tend to be extra cautious and say to use 10 gauge wire because that would be more than enough. When you get into longer trailers that will end up using a lot of wire the heavier gauge wire becomes more necessary.…

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

If the front part of your square-bodied coupler is approximately 3 inches tall, based on the inner dimensions of the lock the Blaylock EZ Lock Trailer Coupler Lock #BLTL-33 will work well for you. The #BLTL-33 has inner dimensions of 3-1/8 inches x…

Generally speaking wheel mount only bike racks are preferred. Especially for people with carbon fiber bike frames since frame mounts aren't recommended at all with them otherwise damage could occur. For other frame designs people still prefer…