Search: hitch coupler lock   >  

Hey Sam, thanks for reaching out! The Ark Articulating Off-Road Coupler for 2" Receivers #AR44FR is a great way to add some versatility in where your trailer can be towed, but since everything can move around it does present some challenges when…

I have heard of similar issues and the culprit is often that the Trailer Sway Control System on your 2015 Toyota Tundra is fighting the Tuson Asymmetric Sway Control #335TSC-1000 that you have on your Safari Condo Alto 2114. This is not normal and…

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

I recommend the Master Lock Hitch Receiver and Coupler Latch Lock Set #2848DAT. These are made by Master Lock and has 6 locking positions that fits a 5/8" latch width, which is the size of most standard couplers, a 1" latch width, which is…

Master Lock has an adjustable latch lock, #2847DAT that has presets for either a 1 inch span or a 2 inch span. We also have some that are 7/8 inch spans which is 1/8 of an inch more than a 3/4. We have #2878DAT, and #e98889. I have linked some video…

Thanks for the picture! To tow a trailer and haul a bike rack off of your Thor Magnitude's hitch, I recommend the Gen-Y Adjustable 2-Ball Mount w/ Stacked Receivers item #325-GH-514. This adjustable ball mount has four 2" receiver openings…

Trailer Hitch Pins like the etrailer Trailer Hitch Receiver Lock for 2" Hitches - Flush - 2-5/8" Span - Chrome #e98880 and #e98881 do not have a specific weight rating due to the fact that they are so much stronger than the rest of the…

We sure can, but the Master Lock #605DAT lock you'd looked at isn't available keyed alike. We do have options for keyed alike coupler locks, however. I'd recommend a latch lock such as the etrailer brand #e98890 for a 7/8 inch span or…

We have a few different options for you to choose from. The CE Smith U-Bolt, #CE15252A, is zinc-plated and it is 3 inches long x 3-1/8 inches wide x 7/16 inch diameter. This u-bolt was designed to fit around 3 inch trailer frames. We also offer this…

You may not even need load resistors to switch to LED lights. The best thing to do is to try the lights without load resistors first. No need to purchase something you may not need until you know need it. Load resistors such as #DI34ZR dissipate heat…

The Optronics kits part #TL5RK and #TL29BK are both very similar. Only real difference is there is a slight housing design difference between the two main taillight assemblies with the #TL29BK having the more recent design. Both are great kits that…

It sounds like you have an Unique Functional Product 2-5/16" square coupler which was bought out by Dexter. The MegaHitch Coupler lock part #UF35-946510 is designed to fit the standard sized coupler so it will most likely not be wide enough or…