Correct Exact Center Steering Stabilizer For A 2018 Newmar Canyon Star 3710

Question

Question:

Hello, I have item Roadmaster Exact Center Steering Stabilizer w/ Custom Brackets for Class A Motorhomes Item # RM42RR in my cart. The item description indicates the included mounting kit is RBK22 but my 2018 Newmar Canyon Star 3710 is a 26K GVW vehicle. Shouldn't it be the RBK25 mounting bracket?

asked by: Jeff R

0

Expert Reply:

Good morning Jeff, so I double checked with Roadmaster and the Exact Center Steering Stabilizer # RM62RR (more specifically the RBK25 mounting kit) is going to be the correct fit for your 2018 Newmar Canyon Star 3710.

The online user guide for your RV shows it is a 26K GVWR Ford F-series chassis with a Triton V10 engine. Per Roadmaster, the RBK25 is only for vehicles with a GVWR 24K or higher and for V10 models only.

It seems like our site does not really make this clear, so I will get to work on correcting this. Sorry for any confusion.

expert reply by: Jesse M

0

Answer 1

Hey Doug! The Firestone Ride-Rite Air Helper Springs #F35FV are the right kit for your 2026 Ford F-350 FX4 dually. However, you will need to measure to be sure it fits. The distance from the top of your rear axle to the top of the jounce bump stop…

view full answer...

Answer 2

Since the pin weight of your camper is 2.1k, I recommend going with the LoadLifter 5000 opposed to the 7500. While technically there is not reason you couldn't use the 7500 kit, it really is not necessary for a camper like yours. Generally the…

view full answer...

Answer 3

Hello Dan, Great question. When you’re comparing the Firestone kits #F59VV and #F2582, they both technically fit your 2025 F-150, but they are designed around different mounting locations and truck configurations. The #F2582 is the traditional…

view full answer...

Answer 4

Hey Jeff, I would strongly recommend the SumoSpring kit part #SS96EV for your 2025 Nissan Frontier. This will give you the support you are looking for without causing the ride quality to be overly harsh which the Timbrens are known to do. Install is…

view full answer...

Answer 5

Hi Todd, I know exactly the feeling you’re describing, and you’re definitely not alone. That floaty, pushy feeling at highway speeds, especially when trucks pass, is really common on the Sprinter 3500 chassis with a taller coach like your Tiburon,…

view full answer...

Answer 6

Hey Dan, welcome back! I'm assuming this is for the same 2025 you asked about before. The Safe-T-Plus Steering Stabilizer #ST98MR is what you need. This is designed to fit a Class C E-450 and comes with the custom mounting brackets. How are you…

view full answer...

Answer 7

The Roadmaster Exact Center Steering Stabilizer w/ Custom Brackets #RM47MR typically comes centered and you would only need to make adjustments after installation and testing to see if it continues to pull. If you adjusted it all the way out to where…

view full answer...

Answer 8

Got ya Mark, thanks for reaching out! The Roadmaster Reflex Steering Stabilizer for Class A Motorhomes is the correct part for the Horizon but there two parts, the steering stabilizer itself #RM-RSSA and a vehicle specific mounting bracket kit. So…

view full answer...

Answer 9

Hi Uwe! Yes, the SnapPad StakPad Universal Leveling Block and Jack Pad #SN24VR can hold that weight. These have a capacity of 40,000 lbs, so as absurd as it may seem a single jack pad can handle the entire weight of your Class A. Using these under…

view full answer...

Answer 10

Hello Amos, thanks for reaching out. Yes the folded depth of the Kwikee Electric RV Step Complete Assembly #LC372261 is approximately 18". So when you’re checking clearance under the coach, you want to plan for about 18 inches sticking back from…

view full answer...

Answer 11

Hi Debbie! We do change part numbers when they are too close to other part numbers we have, and that looks to be the case here. The Safe-T-Plus Steering Stabilizer - White #ST49VR is the same thing as the Safe-T-Plus 41-180 and the Safe-T-Plus…

view full answer...

Answer 12

Harvey, you’re right on target asking about sizing. The AFMD35121 was a 35k BTU unit that’s been discontinued. You can step into the 35K BTU #DMC74MR furnace by Dometic, but it is 2 inches taller than your current one. Most folks just enlarge the…

view full answer...

Correct Exact Center Steering Stabilizer For A 2018 Newmar Canyon Star 3710

Products Featured in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching