Replacement Drive Head For Solera Awning Having Motor PN 591-70 Manufactured in 2012

Question

Question:

We have a 2013 solera awning RPO 858 008145, V 000144148, NFPA 701. The number on the power assembly is Pn 591 70, 12 VDC. 75 rPM date 20/72012. Is this the correct replacement? We sent a prior email but please need you to respond to this email. Thank you. If so we would like to order the his as soon as possible.

asked by: Kathy B

0

Expert Reply:

I reached out to Lippert and they confirmed you will need the Replacement Drive Head # LC273478. This was thanks to the date on your motor being in 2012.

expert reply by: Bud M

0

Answer 1

Absolutely, and there are a couple of options for 40 inch RV fireplaces, depending on the style you want; I'll list the options then explain the fits: - Greystone 40" Electric RV Fireplace with Crystals #LC76AF - Furrion RV Electric…

view full answer...

Answer 2

Hey Mike! The Thetford Aqua-Magic Style II Part-Timer RV Toilet item #TH35SE is going to be about as close of a replacement as you can get for your 42070 model. There is one measurement you're going to want to take to confirm it'll work.…

view full answer...

Answer 3

The Progressive Dynamics Mighty Mini AC/DC Panel and Converter/Smart Charger - 60 Amp #PD4060K is a confirmed replacement for your model 7355 that also has the box and circuit breaker panel. If you simply want the converter replacement, then the…

view full answer...

Answer 4

The Lippert Replacement Hydac Cartridge Valve for RV Slide-Out Hydraulic Pump part #LC177094 is compatible with the Lippert Level Up Leveling System. It's designed to replace the manufacturer part number "WS08W-01T-C-N-0". I checked…

view full answer...

Answer 5

The pitch on your Solera 12V XL Power RV Awning - 21' Wide - Extra-Long 9'8" Projection - Blue Fade Item #LC75FR can be adjusted by loosening the bolt on the articulating arm and moving it to the reach the desired pitch. I've…

view full answer...

Answer 6

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 7

Hey Andrew! Yes, Furrion does have a Chill Cube model with a heat pump. This was actually just released for aftermarket sale. You will need a complete system to make the switch, new R32 units aren't backwards compatible with old R410A systems.…

view full answer...

Answer 8

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 9

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 10

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 11

Hey Jon; I was actually just talking to Furrion about heat options for the Chill Cube yesterday (1/21/2025). At this time, the only way to have heat with this unit is through a furnace on a ducted setup. The Furrion Chill Cube RV AC w/ Air…

view full answer...

Answer 12

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Replacement Drive Head For Solera Awning Having Motor PN 591-70 Manufactured in 2012

Continue Researching