How Much Power Does The High Pointe RV Convection Microwave # HP49ZR Draw?

Question

Question:

How much amps does it take to run this ? We have a 30 amp panel.

asked by: Larrry

0

Expert Reply:

The High Pointe RV Convection Microwave # HP49ZR can draw as much as 1500watts of power which is 12.5 amps at 120 volts power. So you are going to be able to use this on a 15 amp circuit or larger from your 30 amp panel.

expert reply by: Bud M

0

Answer 1

The High Pointe microwave part #HP49ZR would work great as a replacement for what you have now as it's the correct dimensions and also works great. We also have it in black with the part #HP99ZR.

view full answer...

Answer 2

Hey Glenn, To stay within the dimensions you've provided the High Pointe Built-In RV Microwave #HP59ZR might be a possible fit. It's 19-1/8" wide x 11-1/2" tall x 14-13/16" deep with a trim plate that's 20.75” wide x 15”…

view full answer...

Answer 3

Hey Rick, we actually have a direct replacement for the High Pointe EC028BMR with our part #HP99ZR so this would be what you'd want if you were looking for an exact replacement. But if you preferred the part #HP56ZR it would also fit in place of…

view full answer...

Answer 4

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 5

Hey Andrew! Yes, Furrion does have a Chill Cube model with a heat pump. This was actually just released for aftermarket sale. You will need a complete system to make the switch, new R32 units aren't backwards compatible with old R410A systems.…

view full answer...

Answer 6

Hey Bob, thanks for reaching out. The standard PD9160A was designed around lead-acid charging profiles, so that won't provide a proper charge to your lithium batteries. The best move will be to upgrade to the Progressive Dynamics 9300 Series RV…

view full answer...

Answer 7

Hi Jeff, Nice choice with the 100 amp hour Go Power Lithium RV Battery #GP99QR as well as the Expansion Kit #34282182. Also, you can absolutely replace your PD9260 with the PD9360 model that is compatible with lithium batteries, and our part number…

view full answer...

Answer 8

Hello again Monty; I would get the black SumoSprings Custom Helper Springs #SS66PV. These have a capacity of 1,800 lbs so it gives you a bit over the blue without overdoing it. SumoSprings are a great choice if you don't want to go with the air…

view full answer...

Answer 9

Hello Barry, Since you already have a weight distribution (WD) hitch and are only experiencing a little rear sag, I recommend going with SumoSprings. I typically only suggest Timbrens for those who are towing heavy loads regularly, as they can create…

view full answer...

Answer 10

Hey Scott, congrats on the new truck. I checked with Timbren's website and they do not go into specifics on how many spacers or what size you're going to need. The instructions for the Timbren Suspension Enhancement System item #T45MR say to…

view full answer...

Answer 11

Hey Eric, the K-Source Tow Mirrors part #KS48NQ that you referenced will fit your 2025 Toyota Tundra Platinum as long as it doesn't have extendable or telescoping mirrors. What are you towing?

view full answer...

Answer 12

Hey Chad, Good question and you will need spacers for your 2024 Toyota Tundra with the factory lift when installing the Air Lift LoadLifter 5000 Ultimate Air Helper Springs with Internal Jounce Bumpers #AL24JQ. The rear lift on the Tundra is 2 inches…

view full answer...

How Much Power Does The High Pointe RV Convection Microwave # HP49ZR Draw?

Continue Researching