Is It Normal To Have a Different Amount of Spacers for the Sumo Springs Trailer Hepler Springs

Updated 03/05/2024 | Published 02/28/2024

Question:

I am installing the TSS-107-40/47 Sumo Springs 2 sets on my Grand Design Reflection 303RLS. Is it normal to need 1 spacer on one side of the RV, but none on the other side refrigerator side. Also, on the fridge side it will compress with no spacers about 1/8, if I put in the 1/2 spacer it will be outside the recommended range of 1/4 - 1/2 in. compression. Please advise. Thank you.

asked by: Hunter B

Expert Reply:

I spoke with Super Springs about your SumoSprings Trailer Helper Springs w/ Line Relocation Bracket # SS26MV and they said that it is normal to have different amount of spacers on each side and they recommend you leave it as is, as to much compression can cause issues with that spring, but as long as you are in the targeted range it is fine.

expert reply by: Bryce D

Hunter

2/28/2024

Thank you so much for your help. That's what I was thinking, but wanted to be sure. They are now successfully installed. Thank you again and have a great evening! Hunter