Does Draw Tite Hitch # DT25GR Fit 2024 Kia Soul EX

Question

Question:

Are you 100 sure this will fit a 2024 Soul EX? I am not seeing the attachment bolt holes on the drivers side. They appear to be covered by a mfging plastic unit of some kind.

asked by: Ulysses W

0

Expert Reply:

Yes, the Draw Tite hitch part # DT25GR that you referenced does for sure fit the 2024 Kia Soul EX. The only models it doesn't fit are the 1.6 liter turbo models that have the center exhaust.

expert reply by: Jameson C

0

Answer 1

We have a no-drill hitch that fits your 2020 Kia Soul with the Draw Tite part #DT25GR it installs to existing holes in your frame.

view full answer...

Answer 2

To add a hitch to your 2024 Kia Soul, I recommend the Draw-Tite item #DT25GR. This hitch is custom fit and bolts to your Kia with included hardware. It does not fit the 1.6L turbo model. This is a class III hitch with a 2" receiver. It has a…

view full answer...

Answer 3

The Curt #C67FR does have better ground clearance than the Draw-Tite #DT25GR for your 2020 Kia Soul. The reason you have to make a cutout for the Draw-Tite and not the Curt is because Draw-Tite decided to add a plate between the crossbeam and the…

view full answer...

Answer 4

As long as your Soul doesn't have the 1.6L turbocharged engine, we do offer a hitch fit from Curt and from Draw-Tite. The Curt item #C67FR sits tighter up against the underside of the bumper than the Draw-Tite item #DT25GR hitch, so the Curt will…

view full answer...

Answer 5

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 6

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 7

The main difference between the Curt Trailer Hitch Receiver part #C13416 and the EcoHitch Hidden Trailer Hitch Receiver part #EH97FR is that the EcoHitch has a completely hidden cross tube whereas the Curt cross tube will be visible from the rear of…

view full answer...

Answer 8

Hey Jonathon thank you so much for all of that additional information! To haul your bikes behind your class C Sprinter motorhome, while flat towing your Mini, I recommend the Hollywood Racks RV Rider Bike Rack item #HLY64FR and the Roadmaster Dual…

view full answer...

Answer 9

Congrats on the new motorhome Edward! SnapPad doesn't have the 2026 Allego Red 38 KA in their system so I don't know what size your jack feet are. However, we have a few options that will work with the HWH leveling systems. What you'll…

view full answer...

Answer 10

Hey Claudia, I checked with Curt just now and confirmed that their hitch part #C64DR does fit all models of the 2026 Toyota Corolla Cross which includes the hybrid models so it would work great for you. We also had customers with similar hybrid…

view full answer...

Answer 11

Hey Michael, congrats on the new SUV. The EcoHitch item #EH87CR does not require you to remove the rear bumper assembly when installing. It does require some slight fascia trimming though. You'll have to remove a 2-3/4” deep and 4-1/2” wide…

view full answer...

Answer 12

The Hollywood Racks Trail Rider 2-Bike Rack #HR200 weighs about 35 lbs. The Swagman XC 2-Bike Rack #S64650 is lighter at about 26 lbs. The biggest difference between the two is the Swagman rack is rated for 2 bikes at 35 lbs each and the Hollywood…

view full answer...

Does Draw Tite Hitch # DT25GR Fit 2024 Kia Soul EX

Continue Researching