No-Drill Trailer Hitch that Fits 2020 Kia Soul EX

Question

Question:

I mean it does not require any drilling to install.

asked by: Donald W

0

Expert Reply:

We have a no-drill hitch that fits your 2020 Kia Soul with the Draw Tite part # DT25GR it installs to existing holes in your frame.

expert reply by: Jameson C

0

Donald W.

11/23/2021

I mean it does not require any drilling to install.

Jameson C.

11/23/2021

The hitch mentioned does not require any drilling at all to install.

Answer 1

As long as your Soul doesn't have the 1.6L turbocharged engine, we do offer a hitch fit from Curt and from Draw-Tite. The Curt item #C67FR sits tighter up against the underside of the bumper than the Draw-Tite item #DT25GR hitch, so the Curt will…

view full answer...

Answer 2

Yes, the Draw Tite hitch part #DT25GR that you referenced does for sure fit the 2024 Kia Soul EX. The only models it doesn't fit are the 1.6 liter turbo models that have the center exhaust.

view full answer...

Answer 3

To add a hitch to your 2024 Kia Soul, I recommend the Draw-Tite item #DT25GR. This hitch is custom fit and bolts to your Kia with included hardware. It does not fit the 1.6L turbo model. This is a class III hitch with a 2" receiver. It has a…

view full answer...

Answer 4

It does look like a Swagman bike rack like the Trailhead #S63380 will be compatible with the Class I hitch and the Yakima HitchSki #Y02418 since the cradles are adjustable along the arms of the bike rack. Yakima only rates their 4-bike racks for up…

view full answer...

Answer 5

The Curt part #C67FR has a ground clearance of 11.25 inches. The Draw Tite part #DT25GR would sit just a bit lower on your 2020 Kia Soul. The Curt has the hitch opening as close to the rear bumper as possible whereas the Draw Tite hangs just a bit…

view full answer...

Answer 6

No, there are not. I checked with our vendors and the only hitch that will fit a 2023 Kia Soul EV is the Curt item #C67FR. This is a class I hitch with a 1-1/4" receiver. This hitch has a 2,000 lbs towing capacity and a 200 lbs maximum tongue…

view full answer...

Answer 7

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 8

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 9

The main difference between the Curt Trailer Hitch Receiver part #C13416 and the EcoHitch Hidden Trailer Hitch Receiver part #EH97FR is that the EcoHitch has a completely hidden cross tube whereas the Curt cross tube will be visible from the rear of…

view full answer...

Answer 10

Hi David! There are quite a few hitches offered for your 2026 Honda Odyssey, so I definitely understand wanting to know the differences. There are basically three styles available for you and I have them broken out below: Exposed Crosstube: etrailer…

view full answer...

Answer 11

Hey Adrian! The higher capacity for the B&W #BW47BR and Curt #C77MJ comes from the construction. The B&W hitch weighs 45 lbs and then the Curt and Trailer Mate #TMT54FR both weigh 32 lbs. The Trailer Mate does sit just a tad higher compared…

view full answer...

Answer 12

Hey Ben! The Curt does have that restriction on the vertical bike racks so I recommend the TowSmart Trailer Hitch #TS82VR. This has a higher tongue weight capacity and will allow you to carry the VelociRAX. It would be a good idea to add the etrailer…

view full answer...

No-Drill Trailer Hitch that Fits 2020 Kia Soul EX

Continue Researching