How to Find Replacement Grease Seal for 2002 Snowbear Trailer

Updated 02/13/2024 | Published 02/11/2024

Products Featured in This Question

4" Carbon Fiber Digital Caliper

(26)

$12.34

Grease Seal - Double Lip - ID 1.719" / OD 2.565" - for 3,500-lb Axles - Qty 2

(2870)

$8.77

Question:

Hi. I need to replace the hub grease seals on my 2002 Snowbear trailer. I have photos of the seal but can’t seem to find them on the internet. The numbers on the rubber are: T2658 C/R 3696 Any ideas? Thanks.

asked by: Mike M

Expert Reply:

The only thing I was able to find that corresponds with the T2658 is the Timken 2658. However, this is an automatic transmission torque converter seal, not a grease seal. The best thing to do is measure using a digital caliper like the # PTW80157. If you get the inside diameter and outside diameter of your grease seal you can find the right replacement.

For example, if the ID was 1.719" and the OD was 2.565" you could use the # RG06-050. I went ahead and attached a link below to all of our grease seals which can be filtered by inner and outer diameter. If you're still having trouble, I would be happy to help if you find the correct part if you send me your measurements.

expert reply by: Robin H