Running a microwave and fridge on a 30 amp hookup can trip breakers fast. This inverter charger uses PowerAssist to supplement AC input with battery power and runs on a 48V system, so loads keep running without shutting circuits down.
Running a microwave, refrigerator, and charger on a 30 amp hookup quickly overloads incoming power and trips breakers. PowerAssist steps in by reducing battery charging and supplementing AC input with battery power when demand spikes. This keeps high-draw appliances running without forcing you to shut loads off or rely on a generator.
Manually swapping power sources or rewiring creates downtime and risk of interruption. Dual AC inputs accept shore power and a generator or two independent AC sources, with automatic source selection handling the switch. Power stays routed to the system without manual intervention when your input source changes.
Even brief power interruptions can reset electronics or disrupt refrigeration. The main AC output transfers in under 20 milliseconds when grid or generator power drops. Connected loads continue running through the transition without noticeable interruption.
High-demand loads like water heaters or air conditioning can quickly drain a battery bank if left on inverter power. The secondary AC output only activates when AC input is available, keeping those loads off the battery system. This separation prevents unexpected battery depletion during heavy use.
Standard inverter setups cap out quickly when power needs grow. This unit supports parallel operation of up to 6 units and can be configured for split phase and 3-phase systems. It gives you a path to expand output capacity or build more complex power systems without replacing the core equipment.
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Hi everyone, Steve here with etrailer. Let's take a look at the Victron Quattro Pure Sine Wave Inverter Charger. This is a powerful all-in-one power management unit built to deliver clean, reliable power and a smart battery charging for off-grid marine and backup systems. This robust unit will provide up to 5,000 VAs, about 4,000 watts of continuous pure sine wave power. That's gonna give you the muscle to power those heavy loads, whether it's refrigerators, ACs, power tools, sense of electronics, all with clean, stable electricity that you can trust. You do get the included mounting bracket, and that's where it's gonna hang wherever you mount it most likely, or you can stand it up like you have now, but you would obviously have to have room for your wires to come out the bottom and whatnot.
So make sure you're checking the instructions and those kind of things. Reach out to us if you need assistance, install it as well. We can find someone in your area for you with our doula locator tool. Now, one of the standout features I love about this is it has dual AC inputs with an automatic transfer switching. So you can hook up both to shore power and a generator, and this will seamlessly pick the active source without interrupting your loads and without interrupting your electrical current stuff.
So you can keep using everything. You wouldn't even notice that something happened basically. And inside of here, you have a 70 amp adaptive battery charger that's gonna intelligently manage your battery bank, and that's gonna optimize your charge based on the use and chemistry. So let's say you have lithium AGM gel or flooded batteries, this is gonna automatically detect those and do what it needs to does and optimize them based on that chemical makeup. This also includes power assist and power control, and that's gonna prevent overloads on limited AC sources.
And that's gonna do that by supplementing power from the batteries when needed. And it's gonna be great for maximizing generator or shore current without tripping your breakers. As you can see, it's cooled by some fans down below. And again, two AC outputs. One for critical, no brake power, and another for non-essential loads, plus support for parallel split phase or even three phase operations.
So this system is gonna scale with your power needs as your system grows. And because it is part of the Victron ecosystem, you can monitor, configure everything using V.bus communication, and you can use their Victron Connect app, the Serbo GX, or even the VRM portal for remote control. Some quick conventions before we finish the video today. 17 3/4 inches tall, 13 inches wide, and about 9 5/8 inches deep. And then that's counting that back bracket here as well. So again, folks, a great option for you. This is the Victron Quattro Pure Sine Wave Inverter Charger. I'm Steven, thanks for watching.
Info for this part was:
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.