Will The CE Smith Post-Style Guide-Ons CE27626 Fit A 1-1/2" x 3" Beam?

Question

Question:

I am interested in product no. CE27626, I have a shorelandr lund trailer w/ 1 1/2 x 3 beam. Just wondering if it will bolt up or would you suggest something else. Thank you

asked by: Steve G

1

Helpful Expert Reply:

The CE Smith Post-Style Guide-Ons # CE27626 will work very nicely with the 1-1/2" x 3" beam on your Shorelander Lund Trailer. The included u-bolts and brackets will fit frames up to 3" wide and 4-1/4" tall, so your frame will be well within parameters for fitment.

expert reply by: Jesse M

1

Answer 1

The dimension of the bracket that comes with the #CE27626 that you sent in a picture of is 3 inches.

view full answer...

Answer 2

CE Smith Post-Style Guide-Ons #CE27626 were designed to fit trailer frames that are up to but no larger than 3 inches wide and 4-1/4 inches tall. At 2 by 4 inches your frame does meet that description! I have linked a video review for you.

view full answer...

Answer 3

The brackets and U-Bolts that come with the CE Smith Post-Style Guide-Ons #CE27626 will fit 3" wide frames up to 4-1/4" tall. If you need longer U-Bolts then those are available as part #CE11416 which allow you to fit 3" wide frames up…

view full answer...

Answer 4

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 5

Hey Andrew! Yes, Furrion does have a Chill Cube model with a heat pump. This was actually just released for aftermarket sale. You will need a complete system to make the switch, new R32 units aren't backwards compatible with old R410A systems.…

view full answer...

Answer 6

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 7

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 8

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Answer 9

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 10

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 11

We have lift kits for trailer that easily add 2 inches to the height of the trailer. For that you'd want the part #RR23QX and you'd be set. I attached a picture that shows how it installs to give you an idea. This would be the easiest…

view full answer...

Answer 12

Hi Deb! There are quite a few hitches available for your 2025 Honda CR-V Hybrid and I have the 2" receiver options (best size for what you are wanting) listed below with their corresponding weights. Curt Trailer Hitch Receiver - Custom Fit -…

view full answer...

Will The CE Smith Post-Style Guide-Ons CE27626 Fit A 1-1/2" x 3" Beam?

Products Featured in This Question

Product Page this Question was Asked From

Continue Researching