Will Inno Square Bar Feet Work with Older Thule Square Bars

Question

Question:

Will the Inno Feet for Square Crossbars - Raised Side Rails - Black - Qty 4 - INFR work with the older Thule Square Bars? The rep from Thule said I need their old product, Thule Crossroads 450 foot pack but they dont carry it anymore. Your product appears to be similar.

asked by: Rodney S

0

Expert Reply:

Yep! The current Inno square bar feet # INFR do work with the older Thule square crossbars since the two square bars are identical in dimensions.

expert reply by: Jameson C

0

Answer 1

I have the part you need! Since Thule discontinued their old feet that are compatible with the older square crossbars without a bottom channel, Thule doesn't make feet that are compatible. However, Inno uses the same exact square crossbar…

view full answer...

Answer 2

Hey Ban, yes the older Thule square bars are exact same size as the Inno square bars so the feet of the Inno Roof Rack part #IN54XR would work with what you have.

view full answer...

Answer 3

The first thing you need for the roof of your 2018 Ford Edge with a naked roof is a roof rack confirmed as a fit like the Rhino Rack part numbers #RRVA137S-2, #RRRLKVA, and #DK432 which I recommend because it gives you a higher quality roof rack at a…

view full answer...

Answer 4

Since the Inno crossbars are the same dimensions as the older Thule crossbars like what you have you can use the Inno feet #INSUT and Inno fit kit part #INK688 to install your current Thule bars on your roof.

view full answer...

Answer 5

For the older style Thule square bars the only foot solution that works with them is the Inno feet like the part #INXP which fit roof tracks like you have. The Inno bars are the same shape as the older Thule bars and Thule went to a new design where…

view full answer...

Answer 6

Yes, the Thule SquareBar Evo Crossbars - Steel - 43" Long - Qty 2, part #TH712100, will work with the old Thule Crossroad feet. Old Thule feet work the new square bars but the opposite is not true. The new Thule feet will not work with the old…

view full answer...

Answer 7

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 8

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 9

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 10

Hey Andrew! Yes, Furrion does have a Chill Cube model with a heat pump. This was actually just released for aftermarket sale. You will need a complete system to make the switch, new R32 units aren't backwards compatible with old R410A systems.…

view full answer...

Answer 11

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 12

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Will Inno Square Bar Feet Work with Older Thule Square Bars

Product Page this Question was Asked From

Continue Researching