Parts Needed to Add Brake Controller to 2012 GMC Canyon With Factory 4-Way

Updated 02/06/2024 | Published 02/05/2024

Products Featured in This Question

Tekonsha POD Trailer Brake Controller - 1 to 2 Axles - Time Delayed

(1323)

$56.24

Pigtail Wiring Harness for Tekonsha and Draw-Tite Brake Controllers - 34" Long

(183)

$13.75

Universal Installation Kit for Trailer Brake Controller - 7-Way RV and 4-Way Flat - 10 Gauge Wires

(3398)

$119.76

7- and 4-Pole Trailer Connector Socket w/ Mounting Bracket - Vehicle End

(2638)

$43.32

Question:

I have a customer with a 12 GMC Canyon 4wd. He says he already has a 4 way flat and hitch. He wants a brake controller hard wired in. I already have the Pro series 80500. What do I need to wire this in?

asked by: Yipes A

Expert Reply:

You will need to add a 7-way to install the # 39523 (80500) on the 2012 GMC Canyon. If the 4-way at the back is plugged into a round US Car connector behind the bumper you can add a 7-way using the # HM40975. If it is an aftermarket 4-way, or attached using a different connector, you will have to add a 7-way using the # ETBC7.

Since it is a hardwire installation you will also want the Pigtail Wiring Harness for Tekonsha and Draw-Tite Brake Controllers - 34" Long # 7894. This will plug into the connection on the 80500 and give you some extra wire to make your connections in the cab of the truck.

expert reply by: Robin H