Will The B&W Companion Head From the 5TH Wheel Hitch RVK3300 Fit The Base # BWRVB3600?

Question

Question:

Will rvb3300 head fit on bwrvb 3600 base

asked by: Tim R

1

Helpful Expert Reply:

Yes, the Head # BWRVC3006 which fits the Base # BWRVB3300 will also fit the Base # BWRVB3600.

expert reply by: Bud M

1

Answer 1

Hey David, yes the head of your current B and W Companion hitch would fit on the base part #BWRVB3300. If goal was to get a hitch to fit your Ford trucks OEM pucks as cost effectively as possible another option to consider is to just go with the…

view full answer...

Answer 2

Hey Adam, yes the Replacement Head Assembly for B&W Companion 5th Wheel Trailer Hitches #BWRVC3006 will work with both of those bases.

view full answer...

Answer 3

The correct head assembly for the Replacement Base for B&W Companion item #BWRVB3300 is going to be item #BWRVC3006. The Replacement Head Assembly item #BWRVC3006 will slide onto the A-style arms and secure with the included pins and clips. The…

view full answer...

Answer 4

Yes, you could swap out just the base with part #BWRVB3300 to get a fixed base compatible with the puck system in the bed of your F-450.

view full answer...

Answer 5

There is a way you can still use your B&W Companion 5th wheel hitch in your Ford truck with the puck system, although there isn't any type of adapter. The only way you can do this is to replace the base of the Companion with the one that fits…

view full answer...

Answer 6

Yes, the hitch head on the B&W Companion Gooseneck-to-5th-Wheel Trailer Hitch Adapter part #BWRVK3500 will also fit the Replacement Base for B&W Companion OEM 5th Wheel Trailer Hitch for Ford Super Duty part #BWRVB3300. The Replacement Head…

view full answer...

Answer 7

If you have the B and W Companion Base Kit part #BWRVB3300 all you need is the replacement head #BWRVC3006 and you'd have a complete fifth wheel hitch designed to fit the factory Ford fifth wheel rail kits for the Reese Elite underbed rail kits.

view full answer...

Answer 8

To use your current B&W Companion in your 2021 Ram 3500 with the OEM Pucks you will need to replace the base. The correct base for the OEM Pucks in you truck is the Replacement Base for B&W Companion OEM 5th Wheel Trailer Hitch for Ram…

view full answer...

Answer 9

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 10

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 11

Yes, the puck system used on the 2016-2019 Chevy/GMC trucks is different than the pucks used on the 2020 and newer trucks. So you would need a 5th wheel like the B&W Companion #BWRVK3710 for your 2020 GMC Sierra 3500 with an 8' Bed. If you…

view full answer...

Answer 12

Choosing the right height setting for your 5th wheel hitch is a combination of a few different variables. First of all you want your towing setup to be as level as possible. With your Montana High Country 340BH level you will want to measure from the…

view full answer...

Will The B&W Companion Head From the 5TH Wheel Hitch RVK3300 Fit The Base # BWRVB3600?

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching