Wiring Diagram For SeeLevel RV Holding Tank Monitor # SE94VR

Question

Question:

I need a wiring diagram for a seelevel SE94VR system. I bought from trailer and it didn’t come with instructions or wiring diagram

asked by: John C

0

Expert Reply:

Hi John,

I'm sorry you weren't given a set of instructions to go along with your SeeLevel RV Holding Tank Monitor # SE94VR. I've attached a diagram below showing that the White wire will run to your water pump, Red to your 12v power source, Black to your sensor strips as the ground, and Blue to your sensor strips as the positive. To make your connections you can use some 18 gauge wire.

If you have any other questions please let me know and I'd be happy to help.

expert reply by: Kevin C

0

Answer 1

Hey Brad, like with all RV AC units the actual temperature probe is built into the controller of the AC unit and not the wall mounted thermostat. So the part #FR33PR will not relocate the sensor like you are wanting.

view full answer...

Answer 2

Hey Evan, so we do have a way to get a replacement freeze sensor for your Furrion Chill HE with the part #FR43PR which is an all new controller as the sensor is not available by itself. If you check out the picture I attached you can see what the…

view full answer...

Answer 3

Please see the attached images for wiring diagram and installation instructions for the Furrion Chill Replacement RV Air Conditioner for Furrion Setup, #FR86PR.

view full answer...

Answer 4

I checked with SoftStart and they have a diagram for the install of their #SSR54FR on Furrion Chill RV AC units like you asked about. See attached.

view full answer...

Answer 5

Here is the wiring diagram from SeeLevel for the Monitor #SE94VR. I hope this helps you clear things up and get it working.

view full answer...

Answer 6

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 7

Hey Andrew! Yes, Furrion does have a Chill Cube model with a heat pump. This was actually just released for aftermarket sale. You will need a complete system to make the switch, new R32 units aren't backwards compatible with old R410A systems.…

view full answer...

Answer 8

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Answer 9

Hey Melanie. The reason you can't find a replacement for your GE ARC15AACBL2 15,000 btu air conditioner is because they phased them out. In 2025 all RV AC systems had to change over to a new coolant called R32. This was a EPA mandated decision.…

view full answer...

Answer 10

Hey Lars, welcome back! I can indeed confirm that the Furrion Variable Speed Chill Cube air conditioner with a heat pump is indeed really happening. They are currently available for order (02/04/26) and will be shipped out towards the middle of next…

view full answer...

Answer 11

Hey Donny! For your Dometic Penguin/Brisk Air 15,000 BTU AC model B59516.711C0-MX, the correct soft start is the #DMC93JF. This is designed for Dometic Brisk II electronic air conditioner units with in-wall thermostats.

view full answer...

Answer 12

That’s a great question Chadwick, and this is one of those situations where the change in technology really matters. The GE Appliances Low-Profile RV AC w/ Heat Pump part #GE26RR will replace your current ARC13AACBL2 setup, but it’s important to know…

view full answer...

Wiring Diagram For SeeLevel RV Holding Tank Monitor # SE94VR

Product Page this Question was Asked From

Continue Researching