Can I Swap Out The 4 Lug Rims On My Pop Up Camper For 5 Lug Rims?

Updated 01/29/2024 | Published 01/27/2024

Products Featured in This Question

Timbren Axle-Less Trailer Suspension w/ Idler Hubs - Standard Duty - No Drop - 5 on 4-1/2 - 2K

(119)

$778.21

Trailer Idler Hub Assembly for 2,000-lb Axles - 5 on 4-1/2 - Galvanized

(582)

$59.53

Easy Grease Trailer Idler Hub Assembly for 2K Axles - 5 on 4-1/2 - Galvanized

(837)

$39.84

Replacement Trailer Wheel Bearing - L44643 - Qty 1

(2226)

$6.86

Replacement Trailer Wheel Bearing - L44649 - Qty 1

(2226)

$23.07

Question:

I have an old pop up trailer frame that has the four lug bolt pattern for the tire Rim. I would like to go to a five lug and was wondering if I was able to switch out the hubs on the existing axle. To be 5 lug pattern?

asked by: Steven A

Expert Reply:

It very well may be possible for you to swap out the 4 lug hubs on your pop-up for a 5 lug hub. It comes down to what size spindle/bearings are currently on the trailer.

A lot of pop up campers will use a light duty axle rated for 3,500 lbs or less. For example a very common one is a 2,000 lb rated axle, which has a straight spindle and uses either the # L44643 (1" inner diameter) or the # L44649 (1.063" inner diameter) bearings.

If you are able to remove one of the hubs you can measure the spindle with a micrometer to determine the proper bearing size. Another way to determine this is to remove the bearings. Each bearing should have a number stamped on the edge which we can use to determine the correct hub.

If you do have one of the common sizes that I listed above, we can absolutely get you 5 lug hubs that will fit. For example the hub # AKIHUB-545-2-G-2K will fit straight spindles with the # L44649 bearing, or the # AKIHUB-545-2-G-EZ-1K for the # L44643. These hubs use the standard 5 on 4-1/2" bolt pattern.

If this is not exactly what you have, go ahead and get those bearing sizes or measurements feel free to send me your findings and I am happy to make a recommendation.