Replacement Tarp for Extang Trifecta that Fits 2011 Ford F-150 Long Bed

Question

Question:

Looking for the replacement tarp for the extang tonneau cover 2.0 for a 2011 f-150 that has the 8ft bed

asked by: Arnold

0

Expert Reply:

For the Extang Trifecta 2.0 part # EX92415 that fits your 2011 Ford F-150 long bed the correct replacement tarp is the part number # EX43415B.

expert reply by: Jameson C

0

Answer 1

Hey Noah, for your 1999 Ford F-250 long bed the correct replacement Extang Trifecta 2.0 tarp would be the part #EX92725-20,

view full answer...

Answer 2

Hey Matt, thanks for reaching out! I'm guessing your Ford F-350 is a 2016 model since that's what you have in our fitguide. For replacement Trifecta tarps we have the part #EX94725-20 for the Signature 2.0 and the part #EX92725-20 for the…

view full answer...

Answer 3

The correct replacement tarp for your Extang Trifecta on your 1998 Ford F-150 6-1/2' bed is the Replacement Tarp for Extang Trifecta Soft Tonneau Cover #EX43710A.

view full answer...

Answer 4

I am happy to determine the replacement cover for you but I would need the serial number off of your older Extang cover. The easiest way is to locate the serial number. Most of the time the serial number can be found on the driver's side front…

view full answer...

Answer 5

Yes we do have replacement Trifecta tarps available for your 2014 Ford F-150. If you have a 6-1/2' bed, the correct replacement is the Replacement Tarp for Extang Trifecta 2.0 Soft Tonneau Cover #EX92410-20, and if you have the 8' bed the…

view full answer...

Answer 6

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 7

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 8

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 9

Hey Andrew! Yes, Furrion does have a Chill Cube model with a heat pump. This was actually just released for aftermarket sale. You will need a complete system to make the switch, new R32 units aren't backwards compatible with old R410A systems.…

view full answer...

Answer 10

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 11

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Answer 12

Since the pin weight of your camper is 2.1k, I recommend going with the LoadLifter 5000 opposed to the 7500. While technically there is not reason you couldn't use the 7500 kit, it really is not necessary for a camper like yours. Generally the…

view full answer...

Replacement Tarp for Extang Trifecta that Fits 2011 Ford F-150 Long Bed

Products Featured in This Question

Continue Researching