Adapter For Using Yakima ButtonDown Ski Rack on Factory Roof Rack

Question

Question:

I have a Yakima Buttondown 4 ski rack. Is there a kit to adapt the round brackets to my 2015 Buick Enclave factory flat bars?

asked by: Joe C

0

Expert Reply:

We do have adapters for your Yakima ButtonDown ski rack so you can mount it to your factory crossbars. The correct adapter for your ski rack are the Universal MightyMounts for Yakima Roof Mounted Accessories # Y03590.

expert reply by: Kyle S

0

Answer 1

The Universal MightyMounts #Y03590 will work with your Yakima LockJaw bike rack. The MightyMounts are designed to fit crossbars up to 4 inches wide and up to 1-1/2 inches tall. Bars that are either more than 4 inches wide or more than 1-1/2 inches…

view full answer...

Answer 2

The Yakima #Y01166 Replacement Top Infill Strips are designed for the T-slots used on Yakima HD crossbars like #Y01158. The strips are meant to fit into a 11mm wide channel that widens to 22mm, as shown in the provided diagram. If you'd care to…

view full answer...

Answer 3

Yes, the Yakima HighRoad Roof Bike Rack - Wheel Mount - Clamp On #Y02114 is compatible with the Rhino-Rack Vortex Crossbars. You can either use the included clamps, or you can use Yakima T-Slot Adapter #Y02122 to fit the HighRoad into the Rhino-Rack…

view full answer...

Answer 4

I spoke with Lippert, and they informed me that for your Lippert awning you are going to need the: -Replacement Gear Pack for Lippert Solera Awning Motor #LC78VR, with the Replacement Head Pin for Solera Power Awning Gear Drive Head #LC93FR.

view full answer...

Answer 5

The wires you're seeing are for the speakers in your Solera awning, but the easiest way to tell is by which side it's on when you're looking directly at the awning from the front. If it's the left side it's the idler assembly and…

view full answer...

Answer 6

If you have the Yakima Universal MightyMount Adapters, part #Y03590, you are in good shape. The Universal MightyMounts will work with all aero style crossbars that are no more than 4 inches wide or 1-1/2 inches tall. The Vortex bars are just 3-1/8…

view full answer...

Answer 7

Rhino Rack does not offer replacement lock cores but what you can do is use the Rhino Rack Masterkey part #RRRK005-4 to replace all four cores with new cores and have new keys to match.

view full answer...

Answer 8

The top channel on most crossbars like the Rhino-Rack and Yakima are similar but you should never mix and match towers and crossbars between different manufacturers. Their components are designed to work specifically with each other and your Yakima…

view full answer...

Answer 9

Rhino-Rack does not make just the replacement keys for their roof racks available. When a customer is needing a replacement key the only option is to locate the stamped number on the lock core and find a matching lock core set like #RRRK005-4 (for…

view full answer...

Answer 10

You'll want to go with the 39H as the 23H is for narrower bars. The 39H will fit 3-1/8" wide x 1" tall crossbars like you said, so they WILL work with the Yakima Jetstream and Thule WingBar crossbars, because both of those crossbars are…

view full answer...

Answer 11

I have the perfect solution for you. With a Rhino-Rack Pioneer Platform Rack like the Universal #RR42114BF, you can use the Rhino-Rack Carrier Brackets #RR43159 to mount the Ski and Fishing Rod Carrier #RR572. We actually have this setup as one part…

view full answer...

Answer 12

We don't currently carry just the replacement keys so you would have to buy both the key and lock core. If you can find me the code for you key I can try to find the correct replacement. For example, the Rhino-Rack Masterkey Lock Barrels…

view full answer...