Recommended Roof Rack for a 2024 Chevrolet Blazer w/ Flush Mounted Rails

Question

Question:

Do you have a set of crossbars that mount to the flush rails on a 2024 Chevrolet Blazer that do not stick out over the sides?

asked by: Greg S

0

Expert Reply:

Yes, we do! To add a flush mounted roof rack to the rails on your 2024 Chevrolet Blazer, I recommend the roof rack by Yakima which includes the following parts:

Yakima SkyLine FX Roof Rack for Fixed Mounting Points - Aero Crossbars - Black - Qty 2 item # Y38UV

Landing Pad 19 for Yakima SkyLine and Control Towers - Qty 4 item # Y00245

This aero bar roof rack system has a 165 lbs capacity. I recommend adding the Yakima Same Key System item # Y07204 to prevent theft.

expert reply by: Jerred H

0

Answer 1

Hi Chris; we do in fact have a roof rack fit for your 2024 Chevy Blazer EV, so long as your Blazer has flush-mounted rails to attach the feet to. The rack is from Yakima, and I verified this fit directly with them for you. The parts that make up the…

view full answer...

Answer 2

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 3

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 4

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Answer 5

The factory roof rack on the 2016 Subaru Outback Wagon has minimal options to fit the factory roof rack which is different than the factory side rails or flush mounted rails. You can use the Landing Pad 15 for Yakima Control Towers - Qty 4 #Y00241…

view full answer...

Answer 6

Hello Carl, Happy to make sure that we get you the right set-up for your 2021 Lexus GX 460. Thank you so much for the information on your flush mounted bars, it was most helpful. When I look up the URJ150L-GKTGKA I was able to see that you do have…

view full answer...

Answer 7

Hello again Carl, Yes, the Yakima SkyLine Roof Rack for Fixed Mounting Points - CoreBar Crossbars - Steel - Black - Qty 2 #Y38GB will also be a great fit for your 2021 Lexus GX 460 with flush mounted bars. I am still sticking with really liking the…

view full answer...

Answer 8

The best roof rack for a 2024 Toyota RAV4 with flush rails is the roof rack by Yakima which includes the following parts: Yakima SkyLine FX Roof Rack for Fixed Mounting Points - Aero Crossbars - Black - Qty 2 item #Y38UV Landing Pad 23 for Yakima…

view full answer...

Answer 9

According to the installation instructions for the Landing Pad 30 for Yakima SkyLine And Control Towers #Y25ZR, you will have to remove the flush mounted side rails to mount the landing pads. I do have another option for you that does not require the…

view full answer...

Answer 10

Thanks for the photo, and so long as you use the Yakima SkyLine Towers, you can switch the rack to your 2016 Lexus GX 460 with the appropriate landing pads that fit it, the Landing Pad 30 for Yakima SkyLine And Control Towers #Y25ZR.

view full answer...

Answer 11

Assuming you're wanting to use the Yakima CoreBar Crossbars #Y00421 you're looking at, then yes you're just going to need the BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers #Y06179, BaseClip Fit Kit for Yakima BaseLine Roof Rack…

view full answer...

Recommended Roof Rack for a 2024 Chevrolet Blazer w/ Flush Mounted Rails

Products Featured in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching