Replacement Refrigerator Roof Vent Cover For A Dometic RM2652

Question

Question:

Hi, I need a refrigerator roof vent base and cover for a Dometic RM2652. The vertical walls not including the flange are 5.5 x 23.5” . Can you recommend a replacement? The trailer is a 1990 Salem. Thanks,

asked by: Lester S

0

Expert Reply:

The Camco RV Refrigerator Vent Cover # CAM42163 is likely a fit for your roof vent base since it fits a base with a 5-1/4" x 24" base. These vent covers are designed specifically to fit Dometic and Norcold vents so you shouldn't have an issue.

expert reply by: Kevin C

0

Answer 1

The Camco RV Refrigerator Vent Cover - Top Only #CAM42160 has a second set of mounting holes at 4-1/8" x 23-1/2". I recommend double checking the measurement you have to see if this cover will fit. If not you can replace the vent base and…

view full answer...

Answer 2

Hey Jerry! The TorkLift Tie-Downs like the #TL83DR you were looking at are a custom fit so you won't have to drill into your frame. These are the Talon, which is the upgraded aluminum version, and will fit your Ram assuming you have no running…

view full answer...

Answer 3

Hey Daniel, do make cutting the Replacement Cut-To-Fit Slide Topper Fabric for Solera RV Slide-Out Awnings #SO84VR as easy as possible I would recommend using fabric scissors. What slide topper you are looking to replace the fabric of?

view full answer...

Answer 4

Unfortunately, it will not Brian but thanks for the picture. Our Replacement Fabric for etrailer Slide-Out Toppers has a different attachment method so it will not work with your Solera RV Slide-Out Awning item #LCV000177334. The only replacement…

view full answer...

Answer 5

Hello Vernon, Great question. I actually reached out to Coleman-Mach to make sure. Based on what they told me, if your Keystone Alpine 3220RL was equipped with the In-Command system and factory prepped for a third AC, the Coleman-Mach Mach-C Everest…

view full answer...

Answer 6

Hey Cindy, the PowerMax Membrane Plus RV Roof Replacement Kit w/ Rolled PVC Membrane #PM78VR is rolled. So it ships on a roll and is not folded.

view full answer...

Answer 7

Hey Edwin, The Skylight #SR89YR will work perfectly fine with your 1-1/4" thick roof on your 2018 Lance 1575, though they typically will require some trimming to the garnish to fit perfectly. You will want to pick up 2 tubes of self leveling…

view full answer...

Answer 8

Hello Ken, thanks for reaching out. Sounds like you are on the right track here because the type of running boards on your truck do dictate which tie downs to use. You are also correct that you will not be able to use the tie downs from your old 2002…

view full answer...

Answer 9

Hey Demian, we don't have a way to look up what fridge vent cut out dimensions your Forest River has so you'll need to measure yours to verify. If your cutout is 23-3/4" long x 6-3/4" then the Dometic part #DMC97FR will fit. This is…

view full answer...

Answer 10

Hello Greg, thanks for reaching out. The RV Refrigerator Roof Vent Cap and Base #DMC97FR is known to work with many Dometic refrigerator models just like yours. That said, these are not custom fitted, so the best way to confirm fitment is to simply…

view full answer...

Answer 11

To replace your Iota IDP-240 you'll want to use the Progressive Dynamics RV Power Control Center with AC/DC Panel and Converter/Smart Charger #PD4560K18LS8. This panel is rated for 50 amp service, can provide both 120v/240v and is compatible with…

view full answer...

Answer 12

Hello Edward, We don't offer a KCD2-7-203, but from what I could find it was a DPST, on/off switch. The option we have for that which is four pins is the Single Labeled Mini-Rocker Switch #37213735. I'm not sure if this will fit as I could…

view full answer...

Replacement Refrigerator Roof Vent Cover For A Dometic RM2652

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching