Location of Factory Brake Controller Plug on 2023 Ford Explorer

Question

Question:

I got the Tekonsha Plug-In Wiring Adapter for Electric Brake Controllers part # 3035-P for my ford explorer Timberline , but I cannot find where the harness is on my explorer, could you show me where it is?

asked by: Jim Y

0

Expert Reply:

There is a panel above the pedals you will need to remove on your 2023 Ford Explorer. Once you get this out of the way you will see the gray plug up behind the brake pedal. Remove the dummy plug and you will be able to plug in the # 3035-P.

If you watch the attached installation video below starting at the 7 minute mark you will see how to remove the panel and the location of your factory plug.

expert reply by: Robin H

0

Answer 1

Hi Richard! The best brake controllers on the market for your 2023 Ford Explorer XLT are going to be from Redarc. They're super easy to use and set up, and they are very reliable. They are the ones to get. Since you said you will be towing a…

view full answer...

Answer 2

Since your 2022 Ford Explorer has the factory tow package with 7-way connector there will be a plug/port that you can plug the Tekonsha Plug-In Wiring Adapter for Electric Brake Controllers #3035-P into when installing a Tekonsha brake controller…

view full answer...

Answer 3

Hello Bruce, I can certainly try to point you in the right direction. Ford is notorious for making their brake control ports hard to find. On the 2023 Ford Explorer with the factory tow package, the connector is located under the dash on the…

view full answer...

Answer 4

For your LED Marker Light RV Side Cameras w/ Night Vision for Furrion Vision S Systems #FOS05TASF you will want to follow the wiring as provided below: RED: Connects to positive wire on running lights circuit. BROWN: Will connect to the positive wire…

view full answer...

Answer 5

Hey Aaron, If your 2023 Ford Explorer XLT has a factory tow package connector back at the rear of the vehicle then you can use the Curt T-Connector Vehicle Wiring Harness #C55664. If you don't have a factory tow package connector then you'll…

view full answer...

Answer 6

The best trailer brake controller option we have for a 2022 Toyota Tundra is the Curt Echo Mobile Trailer Brake Controller part #C51180. This controller will simply plug into the trailer connector so there is no drilling into the dash or taking up…

view full answer...

Answer 7

Take a look at the video I have linked showing a typical brake controller installation on a 2012 Toyota Tacoma. Our installers chose the lower part of the dash, to the left of the steering wheel and above the emergency brake pedal as the best place.…

view full answer...

Answer 8

If your 2020 Explorer is equipped with the factory 7-way trailer connector, it will have the brake controller connector under the dash. The connector is located under the dash, above and to the right of where the driver's right knee would be. The…

view full answer...

Answer 9

The Curt Trailer Hitch Receiver #CU78FR does fit your 2023 Ford Explorer XLT, yes. For trailer wiring I recommend picking up the Tekonsha T-One #118599 and using the Mounting Brackets #C42CR and #C57202 to secure the 4-Way wiring next to your hitch…

view full answer...

Answer 10

Typically the tongue weight listed on a trailer is the dry, or empty tongue weight. Tongue weight varies not only by how much stuff you have loaded in the trailer, but where it is positioned. You can add 200 pounds of cargo to a trailer and get the…

view full answer...

Answer 11

It sounds like you are having a wiring issue that is either at the brake controller, at the trailer connector that is at the rear of your vehicle, or the trailer connector on your trailer. If you used a vehicle specific wiring harness from the brake…

view full answer...

Answer 12

When it comes to installing The Redarc Tow-Pro Liberty #RED52VR if there is no trailer connected, the active calibration may occur as normal without any indication from the LED., provided your brake light trigger point is active when there is no…

view full answer...

Location of Factory Brake Controller Plug on 2023 Ford Explorer

Featured Help Information

Miscellaneous Media

Continue Researching