Weight of Curt PowerRide 5th Wheel Trailer Hitch for RAM Puck System Prep Package

Question

Question:

How much does the Curt PowerRide 5th Wheel Trailer Hitch for RAM weigh? It can be taken apart?

asked by: Benny

0

Expert Reply:

Yes, you can take apart the 30,000 lb Curt PowerRide 5th Wheel Trailer Hitch for RAM Towing Prep Package # C74BR.

The total weight of the # C74BR is 196 lbs, with 89 lbs being the base and 107 lbs being the head unit.

expert reply by: Kyle S

0

Answer 1

I went out to our warehouse for you and measured the Replacement Strike Plate for Bauer Products RV Door Locks part #BA29VR as this was not information the manufacturer offered. The opening is 2-1/16" tall x 11/16" wide. I have attached a…

view full answer...

Answer 2

Great choice, Rodger! The 30K Curt PowerRide #C74BR uses wear plates that eliminate the need to add grease or use a lube plate. When the wear plates get worn down enough you'll use the Replacement Wear Plates #C52WR to keep your pin box from…

view full answer...

Answer 3

I do have a couple of options for you that are pretty universal and work with most trailers. However, since there isn't a way to cross reference your specific trailer year, make and model, you'll need to take a couple quick measurements to…

view full answer...

Answer 4

The Curt A30 part #C64BR is more of a traditional, higher end fifth wheel hitch that fits the 2022 Ram 3500 OEM prep package whereas the PowerRide part #C74BR is a more modern hitch that has more cushioning and movement in the hitch head as well as…

view full answer...

Answer 5

I highly recommend the 30K Curt PowerRide #C74BR for the puck system in the long bed on your 2024 Ram 2500. This is the aftermarket version of the OEM Mopar hitch, has one of the highest weight ratings at 30K, and is a high-performance hitch when it…

view full answer...

Answer 6

Personally I prefer the B&W Companion OEM 5th Wheel Hitch #BWRVK3305 over the Curt PowerRide 5th Wheel Trailer Hitch #C48BR. With that said the Curt is rated for 30,000lbs while the B&W is only rated up to 25,000lbs so if you need to tow a…

view full answer...

Answer 7

Hey Steve, Yes, a lube plate like the Curt #16721 can be used with the Curt PowerRide 5th Wheel Trailer Hitch #C48BR. If your wear plates do get worn out you can replace them with part #C52WR.

view full answer...

Answer 8

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 9

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 10

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 11

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 12

Hey Tim welcome back! Your ARH15AACBL2 GE AC unit has the old 410a refrigerant in it so the GE Appliances item #GE64FR you were looking at isn't going to work as a replacement. The EPA mandated R32 refrigerant has been used in all new AC's…

view full answer...

Weight of Curt PowerRide 5th Wheel Trailer Hitch for RAM Puck System Prep Package

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching