Can SumoSprings Solo Custom Helper Springs Be Installed On A Truck With A Suspension Lift

Question

Question:

Can these fit with a suspension lifted truck?

asked by: Bill

0

Expert Reply:

The SumoSprings Solo Custom Helper Springs # SS45MR simply replaces the factory bump stops so you wouldn't have an issue with a lifted truck. If the space between the frame and axle increased due to the lift then the springs just wouldn't engage as soon.

expert reply by: Kevin C

0

Answer 1

There are three different SumoSprings Solo Custom Helper Spring options for a 2008 Chevrolet Silverado 1500. The difference is indeed weight capacity; part #SSR-209-40 for 1,000 lbs, part #SS95MR for 1,500 lbs, and part #SS45MR for 2,800 lbs. The…

view full answer...

Answer 2

Hey Matthew, yes the Timbren kit part #TTORSEQ1 that you referenced would work great on a vehicle that is lifted but you have to use spacers to take up that extra space created like with the part #T68MR. How big of a lift does your vehicle have?

view full answer...

Answer 3

The Timbren Active Off-Road Bumpstops part #TABSOSR which are a fit for a 2007 Toyota Tacoma are designed so that there is more space between the spring and frame to allow the suspension to articulate freely when off-road. If you're looking for a…

view full answer...

Answer 4

It is recommended that you use the included spacer with the SumoSprings kit part #SS45MR that you have installed on your 2018 GMC Sierra 1500. This allows the kit to engage at the appropriate point in your suspension travel to give you the support…

view full answer...

Answer 5

In order to choose the best weight distribution hitch, you will first need to know your total tongue weight (TW), which is the tongue weight of your fully loaded and ready to go trailer plus the weight of any cargo behind the rear axle of your tow…

view full answer...

Answer 6

SumoSprings would definitely be the solution I would recommend for your squatting concern. The SumoSprings Solo Custom Helper Springs - Rear Axle item #SS45MR have a 2,800 lbs capacity which would eliminate that carolina lift look you get when your…

view full answer...

Answer 7

Hey Micah! Pacbrake has actually been around for a long time, more than 60 years. We have had customers ask for these air bags in the past, and we've seen them on vehicles coming in. Until now, Firestone has been the go to since their quality is…

view full answer...

Answer 8

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 9

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 10

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 11

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 12

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Can SumoSprings Solo Custom Helper Springs Be Installed On A Truck With A Suspension Lift

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching