Wiring Needed For Adding a 4-Way Flat Trailer Connector On a Toyota Land Cruiser With 24V Power
Published 11/02/2023
Products Featured in This Question
Question:
Hello, I have a 24v landcruiser and want to hook up a flat 4 trailer light connector. Can you help? Thanks
asked by: Kevin P
Expert Reply:
First you are going to need to determine if your Toyota Land Cruiser has a full 24 volt wiring system or if the 24 volt is only ran on the starting system. This was the most common way several of the vehicles were wired so the tail lighting and other functions would all still use 12 volt power. This would allow you to use the Wiring Harness # C59496 to get a 4-way flat connector. A Multimeter # PT89ZR can be used to verify if your current lighting is 12 volt or 24 volt.
If you have 24 volt wiring and lighting you will need a 24V Converter # C46WR and a 4-Way # HM48030. This will allow you to connect directly to a trailer which is 24 volt compatible. Otherwise you will need to also install 24V to 12V reducers in line between the converter and 4-way if the trailer will only operate with 12 volt power. The reducers can be found at your local auto parts stores.
Product Page this Question was Asked From
Curt Powered Tail Light Converter w/ 4-Way Flat Trailer Connector and Install Kit
- Custom Fit Vehicle Wiring
- Trailer Hitch Wiring
- Vehicle End Connector
- Powered Converter
- Universal Fit
- 4 Flat
- Plug and Lead
- Splice-In
- CURT
more information >
Featured Help Information
Instructions
Continue Researching
- Shop: Trailer Wiring
- Search Results: trailer wire kit
- Search Results: 24 volt trailer light
- Shop: Curt Powered Tail Light Converter - 24 Volts
- Video: Breaking Down the Curt Powered Tail Light Converter
- Video: LED Trailer Tail Light Feature Review
- Q&A: IS There a 4-Way Trailer Wiring Kit for a 1990 Toyota Hilux Diesel Import from Japan
- Shop: TecNiq LED Trailer Tail Light - Stop, Tail, Turn, Backup - Submersible - Oval - Red/Clear Lens
- Shop: Transit Tail Light - Stop/Turn/Tail - LED - Submersible - 31 Diodes - 12-24 Volts - Red Lens
- Shop: Curt Powered Tail Light Converter with 4-Pole Flat Trailer Connector
- Shop: Peterson LED Trailer Light - Brake, Tail, Turn - Rectangular - 12V/24V - Red
- Shop: Grommet for Peterson 850 Series Trailer Lights - Flush Mount - Black
- Shop: TecNiq LED Trailer Tail Light - Stop, Tail, Turn, and Reverse - Oval - Red and Clear Lens
- Q&A: Troubleshooting Trailer Wiring that the Turn Signals Activate with Blinkers
- Video: The Low-Down on the Curt Powered Tail Light Converter with 4-Pole Flat Trailer Connector
- Search Results: trailer hitch
- Shop: Trailer Hitch
- Article: Trailer Wiring Diagrams
- Q&A: What is the Difference Between a Class II and a Class III Hitch?
- Q&A: What is the Difference Between a 4-Way and 7-Way Trailer Connector
- Video: Curt Powered Tail Light Converter Installation - 2023 Kia Telluride
- Search Results: trailer wiring
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Shop: Suspension Enhancement
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Q&A: Lug Nut Torque Chart for Trailer Wheels
- Search Results: trailer tires and wheels
- Video: Fifth Wheel Towing Made Simple with Daniel
- Q&A: Installation Time for Blue Ox BX1128 Flat Tow Base Plate Kit for 2016 Jeep Grand Cherokee
- Search Results: trailer jack
on Custom Fit Vehicle Wiring
