Will The 2-Leaf Slipper Spring w/ Radius End # e36SR Fit Hangers Spread 22-1/2" On Center?
Updated 10/31/2023 | Published 10/30/2023
Question:
Hello, the hangers of my trailer center to center are 22-1/2inch apart. My trailer will not be towing any more 600 lbs, including the weight of the frame itself. Will these leaf springs fit well and serve my purpose? Thank you.
asked by: Edgar
Expert Reply:
The 2-Leaf Slipper Spring w/ Radius End # e36SR is designed to fit hangers with a center bolt to center bolt of 22-11/16". This will be close enough to your 22-1/2" center to center measurement. Each spring is rated for 500lbs so as long as your trailer and the cargo do not exceed 1,000lbs they are going to work for the capacity you are needing.
Product Page this Question was Asked From
2-Leaf Slipper Spring w/ Radius End for 1,000-lb Trailer Axles - 24-5/8" Long
- Trailer Leaf Springs
- Slipper Springs
- 9/16 Inch Eye
- Nylon Bushings
- 1000 lbs
- 1-3/4 Inch Wide
- 2 Leaf
- 24-5/8 Inch Long
- Standard Grade
- etrailer
more information >
Continue Researching
- Shop: 2-Leaf Slipper Spring for 1,000-lb Trailer Axles - 24-1/4" Long - EMCO
- Shop: 2-Leaf Slipper Spring w/ Radius End for 1,000-lb Trailer Axles - 24-5/8" Long
- Shop: 2-Leaf Slipper Spring w/ Radius End for 1,000-lb Trailer Axles - 24-5/8" Long
- Q&A: Replacement Leaf Springs for Harbor Freight Folding Trailer
- Article: Slipper Spring Trailer Suspension System Review
- Video: Complete Breakdown of the 2-Leaf Slipper Spring w/ Radius End for 1,000-lb Trailer Axles
- Shop: 2-Leaf Slipper Spring w/ Flat End for 1,800-lb Trailer Axles - 30" Long
- Search Results: 2 inch wide leaf springs
- Search Results: 2 leaf slipper spring
- Video: Review of CE Smith Trailer Suspension Parts - Hangers - CES65WR
- Search Results: trailer leaf springs
- Video: Let’s Check Out the 4-Leaf Slipper Spring w/ Open Eye End for 4,300-lb Trailer Axles
- Q&A: Recommended Parts for Rebuild/Upgrade of Harbor Freight Trailer
- Shop: CE Smith Front Hanger for 1-3/4" Wide Slipper Springs - 1-1/4" Tall - 9/16" Bolt Hole
- Q&A: Can I Replace Leaf Springs With Lower Rating For Better Ride Quality
- Q&A: Replacement Slipper Spring for 1k Trailer Axle
- Q&A: Recommended Axle and Leaf Springs for a Harbor Freight 4x8 Foot Folding Trailer Model 90154
- Article: Where to Position the Trailer Axle?
- Shop: Single-Axle Trailer Hanger Kit for 1-3/4" Slipper Springs - 1-1/2" Tall Front
- Q&A: Upgrading the Tire and Wheel on a Harbor Freight Trailer
- Q&A: How to Determine if Slipper Spring SP-177275 Will Fit Trailer
- Video: Ultimate Overview of the Single-Axle Trailer Hanger Kit for 1-3/4" Slipper Springs
- Video: All About the 3-Leaf Slipper Spring w/ Radius End for 1,500-lb Trailer Axles
- Shop: 2-Leaf Slipper Spring w/ Flat End for 1,800-lb Trailer Axles - 30" Long
- Search Results: boat trailer parts
- Search Results: ce23103
- Search Results: trailer suspension parts
- Search Results: leaf spring hangers
- Video: Ultimate Overview of the CE Smith Front Hanger for 1-3/4" Wide Slipper Springs
- Video: Breaking Down the 2-Leaf Slipper Spring w/ Radius End for 1,000-lb Trailer Axles