Why Does Ramp Gate Seal Kit for Enclosed Trailer Ramp Come With One Block for Hinges

Question

Question:

Why does this only come with one block piece for the hinge area if I have a hinge on both sides of the door?

asked by: Art

0

Expert Reply:

The hinge block piece that comes with the Ramp Gate Seal Kit for Enclosed Trailer Ramp # SR95FR is designed to be trimmed and used for multiple hinge locations. Since each trailer design is different they just toss one large block in the kit so you can trim on as-needed basis.

expert reply by: Jon G

0

Answer 1

I spoke with my contact at Jensen regarding your VR185 stereo that you have installed in your Fleetwood Motorhome. She stated that they do not currently have a replacement stereo available that requires the same 3.7 inch tall x 7.2 inch wide cutout…

view full answer...

Answer 2

Hey Andrew! Yes, Furrion does have a Chill Cube model with a heat pump. This was actually just released for aftermarket sale. You will need a complete system to make the switch, new R32 units aren't backwards compatible with old R410A systems.…

view full answer...

Answer 3

You can use leaf springs that are rated higher than the axle without any issues as long as they measure the correct measurement for your trailer. For example the 6-leaf double eye spring for 7,000 lb axles part #e64SR measures 24-7/8" eye to…

view full answer...

Answer 4

The best replacement option we offer for a Atwood GC10A-4E Water Heater is tankless, the Furrion RV Tankless Water Heater part #FR68SR. It won't be a direct replacement but still pretty easy nonetheless as they are very similar. That said, you…

view full answer...

Answer 5

If you already have a seal that you're replacing then you want to get a seal that's a similar size, otherwise if it's a brand new application then I recommend trying to find the depth of the gap and choosing a seal slightly taller since…

view full answer...

Answer 6

Hi Wayne, I went out to the warehouse and measured the Caliber D-Ring Anchor Kit part #CA89VT for you. The plate dimensions are 4" long by 3 3/4" wide and the inner diameter of the ring is 1 1/4" and outer diameter is 2 1/4". What…

view full answer...

Answer 7

Thank you for reaching out! It looks like your Dexter Axle uses the 5 Spoke Utility Hub and Drum Assembly #8-174-5UC3 so to replace that and your brakes you need the Easy Grease Trailer Hub and Drum Assembly #AKHD-655-6-EZ-K as well as the 12"…

view full answer...

Answer 8

The D-Shaped Rubber Seal is not available in 5/8 inch width just the 3/4 inch #362WS1048-25 and 1/2 inch #362WS1463-25.

view full answer...

Answer 9

I do have an option for you but we don't carry Imperial products. That said, the Side-Door Bar Lock Assembly part #3057-55 would be an excellent replacement for this. The only real difference is the mounting pattern is not the same so some small…

view full answer...

Answer 10

What you need is the Replacement RV Air Conditioner Cover for Penguin and Dometic Air Conditioners #AT3308046006. This is the correct shroud for your Dometic 600312.321.

view full answer...

Answer 11

I can help you figure out the correct replacement leaf spring, but there isn't a database available to use that will be able to tell me which specific parts are used on your 2016 Forest River Wildwood X-Lite 272. You'll need to jack up the…

view full answer...

Why Does Ramp Gate Seal Kit for Enclosed Trailer Ramp Come With One Block for Hinges

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching