What are Specs of Dexter Trailer Axle # 8327812-I

Question

Question:

Is this axle Dexter 25147?

asked by: Anthony

0

Expert Reply:

I can't find any info on that Dexter trailer axle but the part # 8327812-I is a 3.5k lb trailer axle with a 4 inch drop that is 89 inches from hub face to hub face and 74 inches between spring seats. This is a pretty common configuration but you would need to verify that these dimensions are what you have/need.

expert reply by: Jameson C

0

Answer 1

I am able to get you setup with something that will work for you. Based on my research and after speaking with a representative from Dexter I was able to get some information about your existing axle. The specs for your axle are as follows: rated for…

view full answer...

Answer 2

I reached out to my contact at Dexter and based on the part number you provided you have an older mobile home axle that has an 86-1/2" hub face to hub face measurement, and 75-1/2" spring center to spring center measurement. They were…

view full answer...

Answer 3

Assuming you need a 3500 lb axle, the #8327812 with an 89 inch hub face to hub face and a 74 inch spring seat center to center spacing is the closest axle with a 4 inch drop spindle we offer to the dimensions you mentioned. This axle could work for…

view full answer...

Answer 4

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 5

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Answer 6

You can use leaf springs that are rated higher than the axle without any issues as long as they measure the correct measurement for your trailer. For example the 6-leaf double eye spring for 7,000 lb axles part #e64SR measures 24-7/8" eye to…

view full answer...

Answer 7

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 8

It sounds like you are speaking of the wires for the brake magnets. If this is correct, you will need to connect one of the wires to the brake controller output wire on your trailer connector and the other wire will need to be grounded to a clean…

view full answer...

Answer 9

The #84 spindle is just a common way to identify the spindle dimensions typically used for 3,500 lb axles. So instead of listing out the parts, people can just say they have #84 spindles and it's easier to know what fits it. The CE Smith Trailer…

view full answer...

Answer 10

Hey Ian, great to hear from you again! The differences between the MORryde CRE3000 #MR87ZR and AllTrek 4000 #MR89DR that fit a 33" wheelbase is the height between the hanger and equalizer bolts, and the amount of travel the suspension style will…

view full answer...

Answer 11

We have lift kits for trailer that easily add 2 inches to the height of the trailer. For that you'd want the part #RR23QX and you'd be set. I attached a picture that shows how it installs to give you an idea. This would be the easiest…

view full answer...

Answer 12

The two sizes you mentioned are pretty similar and fit many of the same 15 inch wheels. The 205/75-15 fits rim widths of 5 inch to 6 inch whereas the 225/75-15 fits widths that are 5 inch to 6-1/2 inch. The 205 is 27.1 inches tall and the 225 is 28.4…

view full answer...

What are Specs of Dexter Trailer Axle # 8327812-I

Product Page this Question was Asked From

Continue Researching