Does Saris Bones EX Trunk Bike Rack Fit 2022 Honda CR-V Hybrid Touring

Question

Question:

Unfortunately, part # SAR83FR states that it is not compatible with 2022 Honda CRV Hybrid Touring AWD, so it is not compatible with all 2022 Honda CRV models, correct?

asked by: Kevin H

0

Expert Reply:

Sorry for the confusion but the Saris Bones EX part # SAR83FR does fit all models of the 2022 Honda CR-V including the Hybrid Touring AWD.

expert reply by: Jameson C

0

Answer 1

The placement of the Hatch Huggers for Saris Trunk Mount Bike Racks #SA3035 depends on the specific vehicle and bike rack. I confirmed with Saris that you should use the hatch huggers for the side straps when using the Saris Bones EX 3 #SA803 on your…

view full answer...

Answer 2

The Saris Bones EX 2 Bike Rack #SAR83FR is a fit for all models of the 2022 Honda CR-V so it'll work great for your EXL Hybrid! Please note that your CR-V should have a function where the rear wiper turns on when you have the wipers active and…

view full answer...

Answer 3

The Hatch Huggers #SA3035 are needed to replace both the top and side hooks of the Saris Bones #SA805BL on your Toyota Prius. They are needed at the top to protect the glass on your Prius that's above the hatch. Then for the side attachments…

view full answer...

Answer 4

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 5

Hey Nicholas, welcome back. To add a hitch to your 2023 Honda CR-V Hybrid Sport, I recommend the Curt item #C13397. It fits all models of the 2023 CR-V including your hybrid sport. This custom fit hitch has a 2" receiver, a 3,500 lbs towing…

view full answer...

Answer 6

There are indeed two 2" trailer hitches available for your 2020 Honda CR-V; the etrailer #e98848 and the Curt #C13397. These Class III hitches are essentially identical in every way except for the finish/powder coat that they use. I personally…

view full answer...

Answer 7

Hey Scott, thanks for reaching out! Yes, the Curt Trailer Hitch Receiver #C13397 will fit perfectly fine on your 2025 Honda CR-V Hybrid Sport. What are you planning on using the hitch receiver for?

view full answer...

Answer 8

Hey Chris, thanks for reaching out. Putting a higher rated Class III hitch on the CR-V does not raise the vehicle’s actual tongue weight limit. The hitch itself may be built to handle a lot more, but the real limit is still whatever Honda says the…

view full answer...

Answer 9

Hi Jerry, The TST website shows that their cap style sensors like part #TST47FR will work with either rubber or metal valve stems, so the rubber valve stems you have currently will work just fine. If you're still wanting to switch to metal valve…

view full answer...

Answer 10

We do! I recommend going with the Aluminum Viking Series Valhalla Trailer Wheel #TA75FR which is compatible with up to 100 psi but you'll need to swap out the rubber valve stem (only rated for up to 80 psi) to the Americana Metal, Bolt-In Valve…

view full answer...

Answer 11

Hey Carlos. The Curt Hitch item #C13397 does indeed fit a 2023 Honda CR-V Sport Touring Hybrid. The hands-free liftgate feature will still work once installed. The only thing that will change is that your foot will need to go on either side of the…

view full answer...

Does Saris Bones EX Trunk Bike Rack Fit 2022 Honda CR-V Hybrid Touring

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching