Option to Lift 5th Wheel Trailer With Leaf Springs Already on Top of Axles

Updated 08/22/2023 | Published 08/21/2023

Question:

I have a 2019 Primetime Crusader 5th wheel 29BH 35ft in length. I need about 2 inches of clearance in the rear to keep from dragging when backing into my drive. The springs are on top of the axles from the factory. Any suggestions?

asked by: Jimmy P

Helpful Expert Reply:

There is a potential option to give your 5th wheel trailer the added 2 inches of lift you are looking for by using a lift kit:

- Correct Track Trailer Alignment and Lift Kit - Tandem Axle # RR23QX

I say "potential" because there are a couple of things you need to check to ensure the # RR23QX will work for your Primetime Crusader. This kit requires at least 2-5/8" from the top of the hanger to its mounting hole, and the hanger needs to be 3" wide x 3-3/4" tall, or 3" wide x 5" tall. Those are pretty standard so it is likely you have that but you do want to take some quick measurements to be sure.

expert reply by: Kyle S