Correct Trailer Wiring Harness For 2023 Tesla Model 3

Question

Question:

Hello, Confirming part #119250KIT is the correct trailer wiring harness for a 2023 Tesla Model 3 Long Range. Im only planning on using it for the light bar on my bicycle rack brake and plate lights

asked by: Kevin B

1

Helpful Expert Reply:

Yep, you got it right. I can verify for you the correct trailer wiring harness for your 2023 Tesla Model 3 is the one you mentioned:

- ZCI Circuit Protected Vehicle Wiring Harness # 119250KIT

expert reply by: Kyle S

1

Answer 1

From what I'm seeing it does look like the TorkLift TY2020 wiring kit is the same as our ZCI Circuit Protected Vehicle Wiring Harness #119250KIT. The ZCI kit is excellent for your 2023 Tesla Model 3 because you aren't getting into the vehicle…

view full answer...

Answer 2

For a hitch that fits your 2023 Model Y I recommend the Draw-Tite Max-Frame Trailer Hitch Receiver #DT58MR. It features a bolt-on installation and will be completely hidden with your bumper panel in place. For wiring, check out the ZCI Circuit…

view full answer...

Answer 3

It sounds like you're looking for the T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector part #TK92VR which is the same as part 118875 and a confirmed fit for a 2021 - 2023 Tesla Model Y. This harness is a plug-in play fit which does…

view full answer...

Answer 4

It depends on what trailer you'd consider to be "most" trailers, but with a Tesla you're going to be pretty limited so I'll assume it's nothing with brakes. So with that being said, we have the ZCI Circuit Protected Vehicle…

view full answer...

Answer 5

I have a couple possible solutions, but I don't think the hitch manufacturers had a 7-way in mind when they designed the hitches. There also is not a lot of space to work with on the 2023 Model Y. As you said, the safety chain attachments are in…

view full answer...

Answer 6

To use your Hollywood Racks Sport Rider SE Bike Rack item #HLY84FR on a 2023 Tesla Model 3, I recommend the etrailer Hitch Item #e33ZR. This hitch is custom fit and bolts to your Tesla with included hardware. I really like the etrailer Hitch Item…

view full answer...

Answer 7

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 8

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 9

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 10

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 11

Hey Jonathon thank you so much for all of that additional information! To haul your bikes behind your class C Sprinter motorhome, while flat towing your Mini, I recommend the Hollywood Racks RV Rider Bike Rack item #HLY64FR and the Roadmaster Dual…

view full answer...

Answer 12

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Correct Trailer Wiring Harness For 2023 Tesla Model 3

Featured Help Information

Miscellaneous Media

Continue Researching