Can I Put The Yakima HighRoller Bike Rack On The MegaWarrior Platform

Question

Question:

Looking to attach this to my Thule Wingbar Evo roof rack on a 2009 Honda Civic LX-S. Will i be able to also attach the Yakima Highroller bike attachment onto the LoadWarrior? If yes, will I have to purchase an extra load bar to do so? If you could also let me know how much internal space would be available after attaching the Highroller that’d be appreciated. Thanks in advance

asked by: Ricky

0

Expert Reply:

Yes, you can attach your Yakima Highroller bike rack to the LoadWarrior basket # Y07070. You simply need to purchase one additional Load bar # 8870042. The Highroller bike rack also uses the universal design clamps, so you can attach it directly to the loadbar just as you would to a roof rack crossbar. The Highroller bike rack is only about 8" wide, so if you were to mount it all the way to the side of the 44" wide cargo basket, you would still have about 35" or 36" of the basket left for storage.

expert reply by: Jesse M

0

Answer 1

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 2

Hey Doug! The Firestone Ride-Rite Air Helper Springs #F35FV are the right kit for your 2026 Ford F-350 FX4 dually. However, you will need to measure to be sure it fits. The distance from the top of your rear axle to the top of the jounce bump stop…

view full answer...

Answer 3

Since the pin weight of your camper is 2.1k, I recommend going with the LoadLifter 5000 opposed to the 7500. While technically there is not reason you couldn't use the 7500 kit, it really is not necessary for a camper like yours. Generally the…

view full answer...

Answer 4

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 5

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 6

Hi Daniel, The short answer is yes! You can use the Yakima HD Bar Adapters for Yakima Streamline Towers part #Y03541 to use your Yakima crossbars in a RetraxPRO XR tonneau cover! You will need a few parts to accomplish this though: HD Bar SL Adapter…

view full answer...

Answer 7

The components in the photo you referenced are from Yakima. Yakima's artificial rain gutters are the Side Loader Brackets #Y08002. The roof rack towers for the rain gutter system are the Yakima 1A Raingutter Towers #Y00101, which come in a…

view full answer...

Answer 8

I have a great alternate solution for you. Unfortunately, I confirmed with Curt that the Cargo Basket #C18115-117 will not work with your factory crossbars on your Toyota RAV4 Limited. However, a great alternative is the Yakima LoadWarrior Roof Rack…

view full answer...

Answer 9

Yes, The Curt Roof Mounted Cargo Basket part #C18115-117 will certainly fit your 2018 Nissan Pathfinder if it has a factory or aftermarket roof rack installed with cross bars that are not over 3" wide x 1-5/8" tall. If you let me know what…

view full answer...

Answer 10

I do have similar roof mounted cargo baskets that can be locked to the vehicle's roof rack but the Curt Roof Mounted Cargo Basket part #C18115-117 does not have this feature because it is more of any entry level, economy roof basket. If you must…

view full answer...

Answer 11

Hello Quang, thanks for reaching out. Yes, you can use the Coil SumoSprings Custom Helper Springs for Coil Spring Suspension #CSS-1094 on both the front and rear of your 2023 Jeep Wrangler. Also, you can indeed use them with SumoSprings helper…

view full answer...

Answer 12

The hole in your 2016 Ram 1500's engine block should be open from the factory to accept the Kat's Heaters Custom Fit Engine Block Heater - Cartridge Style - 120V - 400 Watts #KH11814. Since the hole is open we do recommend blowing out the…

view full answer...

Can I Put The Yakima HighRoller Bike Rack On The MegaWarrior Platform

Products Featured in This Question

Product Page this Question was Asked From

Continue Researching