2018 Heartland Torque 371 Replacement Jack Control Panel

Question

Question:

I have a 2018 Heartland Torque 371 w/ a Lippert 6 jack auto leveling system with a malfunctioning 5inch diagonal control pad. I wanted to check to make sure this is the correct replacement. Thanks.

asked by: Don F

0

Expert Reply:

Thank you for your pictures. From that it's easy to tell that the part # LC83VR is the correct replacement.

expert reply by: Jameson C

0

Control Panel
(click to enlarge)

Back of Control Panel
(click to enlarge)

Answer 1

Thank you for providing those pictures, using the pictures I was able to determine that the Replacement Touch Screen Control Panel #LC83VR is the correct replacement for your Lippert jack system.

view full answer...

Answer 2

The Replacement Touch Screen Control Panel for Lippert Ground Control TT or Lippert OneControl #LC83VR does not have a warranty but it is a direct replacement for your current control panel so it's going to control all of the things your old one…

view full answer...

Answer 3

The Replacement Touch Screen Control Panel #LC83VR will fit all of the Lippert OneControl leveling systems. We know that your 2021 Forest River Sabre does have a powered leveling system, but we do not have literature that will tell us exactly what…

view full answer...

Answer 4

Thank you so much for the photos! They were super helpful, and I can verify for you that the correct touch screen panel for your Lippert 6-point leveling system is the part number you asked about: - Replacement Touch Screen Control Panel #LC83VR This…

view full answer...

Answer 5

The correct touch screen for your Lippert Ground Control for your travel trailer is the #LC83VR you looked at. More often than not Lippert is unable to identify the serial number, but that OCTP_5_ indicates the 5" screen so we know this is the…

view full answer...

Answer 6

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 7

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 8

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 9

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Answer 10

The main difference between the Curt Trailer Hitch Receiver part #C13416 and the EcoHitch Hidden Trailer Hitch Receiver part #EH97FR is that the EcoHitch has a completely hidden cross tube whereas the Curt cross tube will be visible from the rear of…

view full answer...

Answer 11

Hey Jon; I was actually just talking to Furrion about heat options for the Chill Cube yesterday (1/21/2025). At this time, the only way to have heat with this unit is through a furnace on a ducted setup. The Furrion Chill Cube RV AC w/ Air…

view full answer...

Answer 12

Congrats on the new motorhome Edward! SnapPad doesn't have the 2026 Allego Red 38 KA in their system so I don't know what size your jack feet are. However, we have a few options that will work with the HWH leveling systems. What you'll…

view full answer...

2018 Heartland Torque 371 Replacement Jack Control Panel

Continue Researching